Under-desk mounting
Mount the DVI DA6 Plus or DVI DA8 Plus (not shown) under furniture, using the optional Extron MBU 149
#
Under furniture mounting the DVI DA4 Plus
To mount the unit under a desk or table:
1.If necessary, remove rubber feet from the bottom of the unit.
2.Secure the
3.Hold the unit, with the mounting brackets attached, under the furniture where it will be secured. Mark the position of the holes on the underside of the furniture.
4.In the marked positions, drill four pilot holes 3/32" in diameter and 1/4" deep.
5.Insert the four provided wood screws into the pilot holes and tighten until approximately 1/4" of the screw head is protruding.
6.Guide the holes of the mounting brackets over the protruding screw head and slide the unit forward or backward to seat it firmly under the furniture.
7.Tighten all four wood screws to secure the unit in place.
DVI DA Plus Series • Installation and Operation |