Introduction
About this Manual
This manual provides information on the Extron DA AV EQ series of audio/video distribution amplifiers and discusses how to install and operate them.
The terms “DA,” “amplifier,” and “distribution amplifier” are used interchangeably to refer to any of the models in the DA AV EQ series.
About the DA AV EQ Series
The Extron DA AV EQ Series products are
Models
The DA AV EQ Series consists of the following 10 models:
DA 6V EQ — One input, six outputs, composite video with equalization and gain controls
DA 6AV EQ — One input, six outputs, audio, and composite video with equalization and gain controls
DA 6AV RCA EQ — One input, six outputs, audio on RCA connectors, and composite video with equalization and gain controls
DA 6SV EQ — One input; six outputs;
DA 6SVA EQ — One input; six outputs; audio; and
DA 6SVA RCA EQ — One input; six outputs; audio on RCA connectors; and
DA 6A — One input, six outputs, audio only
DA 3AV RCA — One input, three outputs, audio on RCA connectors, and composite video
DA 12V/6V Dual EQ — Dual composite video DA that can function as either a
DA 8V/4V Dual EQ — Dual composite video DA that can function as either a
Features
Equalization and gain control — Independent gain and equalization control for each two outputs provides more flexibility and more accurate cable compensation to drive different lengths of cables from different outputs.
Outputs with similar lengths of cables should be paired in the same output group so that they can share the same gain and EQ setup.
Passive video
Power supply — An internal 100 VAC to 240 VAC, 50/60 Hz, autoswitchable power supply is provided on all models.
Enclosure — All models have a compact 1U, half rack enclosure, six inches in depth.
High bandwidth — Bandwidth of 150 MHz @
Rack and furniture mountability — All models can be mounted on a rack shelf, under a desk or podium, or through a desk or table top.
DA AV EQ Series • Introduction | DA AV EQ Series • Introduction |