Other useful features
Setting when using external devices
Input source settings
Option
Input Select
For setting the signal type of external equipment.
Item
EXT1: Y/C, CVBS, RGB
EXT2: Y/C, CVBS
NOTE
•If no (colour) image displays, try changing to another signal type.
•Check the operation manual of the external equipment for the signal type.
Setup
Input Label
Skipping specified inputs
Setup
Input Skip
This setting allows you to skip the SCART, HDMI or RGB input on the Input Source Selection operation.
EXT1 (SCART)
EXT2 (SCART)
EXT4 (RGB)
HDMI1 |
|
|
HDMI2 | Yes | No |
HDMI3 |
|
|
Colour system settings
Option
Colour System
You can label each input source with a custom description.
1Press b to select the desired input source.
2Go to “MENU” > “Setup” > “Input Label”.
3Press a/b/c/d to select each character of the new name for the input source, and then press OK.
|
|
|
|
|
|
|
|
|
|
|
|
|
| DVD |
|
|
|
|
|
| |
A B C D E | F | G | H | I | J CLEAR | |||||
K | L | M N O | P | Q | R | S | T BACK | |||
U | V W | X | Y | Z | + | _ |
| |||
0 | 1 | 2 | 3 | 4 | 5 | 6 | 7 | 8 | 9 | END |
|
|
|
|
|
|
|
|
|
|
|
4Repeat until the label is fully spelt out.
NOTE
•The label can be six characters or less.
•When you want to set an input source label of less than six characters, select “END” to set the name.
INPUT SOURCE
TV
EXT1
EXT2
DVD
EXT4
HDMI1
EXT6
NOTE
•You cannot change labels if the input source is “TV” or “USB”.
You can change the colour system to one that is compatible with the image on the screen.
NOTE
•The factory preset value is “Auto”.
•If “Auto” is selected, the colour system for each channel is automatically set. If an image does not display clearly, select another colour system (e.g. “PAL”, “SECAM”).
Additional features
Setup
Quick Start
You can reduce the TV’s
Item
On: The TV quickly starts up from standby. 30 W or more of power consumption is required during standby.
Off: Power consumption is small during standby.
32
