Henny Penny 8000 manual Operating Controls, Description Function

					Model 8000 Computron
1-3.	OPERATING CONTROLS		Refer to Figure 1-1.
Fig.	Item	Description	Function
No.	No.
1-1	1		Lights when the control calls for heat; the elements or
			burners come on and heat the shortening
1-1	2	Digital Display	Shows all the functions of the Cook Cycle, program modes,
			diagnostic modes, and alarms
1-1	3		Lights when the solenoid closes and pressure starts to build
			inside frypot
1-1	4		Flashes when the shortening temperature is NOT at the
			proper temperature for cooking product
1-1	5		Lights when the shortening temperature is 5° F (3° C) below
			to 15° F (9° C) above the cooking temperature, signaling the
			operator that the shortening temperature IS at the proper
			temperature for cooking product
1-1	6		Press to display the following fryer information and status:
			a. The temperature of the shortening
			b. The temperature setpoint
			c. Filter status
			d. The number of times filtered today
			e. The average no. of filters per day
			f. No. of times Cook Cycle was stopped early today
			g. No. of times Cook Cycle was stopped early in past week
			e. Oil Life Display (Only if “Change Oil” feature is enabled)
			f. Date and time
			If pressed in the Program Mode, shows previous settings;
			pressing this along with		accesses the Information
			Mode which has historic	information on the operator and
			fryer’s performance
1-1	7 & 8		Used to adjust the value of the currently displayed setting in
			the Program modes

1-2 1005