Hoshizaki KMD-700MRH, KMD-900MAH, KMD-700MAH Sanitizing Procedure Following Cleaning Procedure

Page 33

[b] SANITIZING PROCEDURE - Following Cleaning Procedure

1)Dilute a 5.25% Sodium Hypochlorite solution with water (Add approximately 1.25 fl. oz. to

2.5gal. of water).

2)Remove the Insulation Panel by removing thumbscrew, lifting up the panel slightly and pulling it toward you.

3)Pour the sanitizing solution into the Water Tank.

4)Replace the Insulation Panel and the Front Panel in their correct positions.

Note: Make sure that the Control Switch is in the “WASH” position and the Cleaning Valve is open.

5)Turn on the power supply, and start the sanitizing process.

6)Turn off the power supply after 15 minutes.

7)Remove the Front Panel.

8)Remove the Insulation Panel by removing thumbscrew, lifting up the panel slightly and pulling it toward you. Remove Cube Guide B by removing thumbscrew. Remove Cube Guide A. Remove Overflow Cap, Overflow Pipe, and Water Shield.

9)Remove the Drain Plug located inside the Water Tank. Drain the Water Tank. Replace the Drain Plug in its correct position.

10)Replace Water Shield, Overflow Pipe, Overflow Cap, Cube Guide A, Cube Guide B, and Insulation Panel in their correct positions.

11)Repeat the above steps 16) through 29) in “[a] CLEANING PROCEDURE” two times to rinse thoroughly.

12)Close the Cleaning Valve.

13)Move the Control Switch to the “ICE” position.

14)Replace the Front Panel in its correct position.

15)Clean the Storage Bin/Dispenser Unit with water.

16)Turn on the power supply, and start the automatic icemaking process.

33

Page 32 Page 34
Image 33
Page 32 Page 34
Contents Issued Hoshizaki AMERICA, INC Contents KMD-700MAH Air-cooled Specifications Nameplate RatingKMD-700MWH Water-cooled KMD-700MRH Remote Air-cooled KMD-900MAH Air-cooled KMD-900MWH Water-cooled KMD-900MRH Remote Air-cooled KMD-700MAH DIMENSIONS/CONNECTIONSKMD-700MWH, KMD-900MWH KMD-700MRH, KMD-900MRH KMD-900MAH Page Location HOW to Remove Panels See FigSET UP Electrical Connection Installation of Remote Condenser Unit Checks Before InstallationLocation SET UP Electrical Connection Stacking Condenser Unit With Storage Bin See Fig With Dispenser Unit See Fig Water Supply and Drain ConnectionsWith Storage Bin With Dispenser Unit Final Check List Start UP TOP View Preparing the Icemaker for Long Storage Page Cleaning Instructions Warning III. Cleaning and Maintenance InstructionsCleaning Procedure Page Sanitizing Procedure Following Cleaning Procedure Maintenance Hoshizaki
Related manuals
Manual 80 pages 59.49 Kb Manual 42 pages 58.83 Kb

KMD-900MRH, KMD-900MWH, KMD-700MRH, KMD-700MWH, KMD-700MAH specifications

The Hoshizaki KMD series offers a range of high-performance ice machines designed to meet the needs of various commercial applications, including restaurants, bars, and healthcare facilities. Models such as the KMD-700MAH, KMD-700MRH, KMD-900MRH, KMD-900MWH, and KMD-900MAH are equipped with innovative technologies and features that ensure efficient ice production and reliable operation.

The KMD-700MAH model is known for its adaptability and efficiency, producing flake ice that is ideal for use in various applications like food preservation, cooling drinks, and more. With a production capacity of up to 700 pounds of ice per day, this model is perfect for medium-sized establishments. Its advanced design incorporates a unique evaporator that enhances ice production while minimizing energy consumption.

Similarly, the KMD-700MRH offers versatility with a similar production capacity, focusing on reliability and performance. This model uses a high-efficiency compressor and a self-contained refrigeration system, ensuring consistent ice production across different ambient conditions. The KMD-700MRH is especially suitable for locations that require frequent and reliable ice replenishment.

The KMD-900 series takes performance a step further, with the KMD-900MRH and KMD-900MAH providing a higher production capacity of up to 900 pounds per day. These machines leverage Hoshizaki’s patented air-cooled technology, which enhances efficiency and reduces operating costs. The robust construction and advanced features make them ideal for high-demand environments.

The KMD-900MWH variant offers an innovative water-cooled option, suitable for businesses in areas with high ambient temperatures or those where air-cooled machines might struggle. By utilizing a water cooling system, it ensures stable performance even in challenging conditions, making it a dependable choice for busy kitchens.

All models in the KMD series feature an easy-to-use digital control panel, which allows for effortless monitoring and adjustments to operations. This technology not only simplifies management but also enables users to receive real-time alerts regarding machine status and maintenance needs, ultimately minimizing downtime.

In summary, the Hoshizaki KMD-700MAH, KMD-700MRH, KMD-900MRH, KMD-900MWH, and KMD-900MAH models are equipped with advanced ice-making technologies designed to deliver high production rates, efficient energy consumption, and reliable performance. Whether it's for a restaurant, bar, or healthcare application, these machines bring together reliability and versatility, making them indispensable tools for any commercial kitchen environment.
Top Page Image Contents