Hoshizaki KM-1900SAH/3, KM-1900SRH/3 If a Hoshizaki B-800, B-900, or B-1150 storage bin is used

Page 16

6)Install the bin control thermostat as follows:

a.Remove the baffle from the storage bin.

b.Remove the tie securing the bin control thermostat assembly. Remove the

2 thumbscrews and the "Z" bracket.

c.Remove the bin control thermostat assembly from the shipping hook by lifting it up and shifting it to the right. Lower the thermostat extension bracket (stainless) with the thermostat bulb attachment and thermostat bulb through the hole located at the bottom of the icemaker. Next, lower the thermostat bracket (plastic) through the hole. See Fig. 3.

Wall

Bin Control Thermostat Assembly

Shipping Hook

 

Thermostat Bracket

Plug

(plastic)

 

Tie

Thermostat Extension

Bracket (stainless)

 

Thermostat Bulb

Receptacle

Attachment (plastic)

 

and Thermostat Bulb

"Z" Bracket

 

Thumbscrews

 

Hole

Hook Bushing

Thumbscrews

Fig. 3

d. Slide the left side of the upper part of the assembly towards you and make sure it is hooked on the wall. Make sure the left side and bottom of the assembly are flush against the wall and base panel.

e. Secure the assembly in place with the thumbscrews (unless you are installing an upper unit). (See "II.E. Installation of Upper Unit.")

f. Insert the plug into the receptacle on the assembly until it locks into place. See Fig. 3.

If a Hoshizaki B-800, B-900, or B-1150 storage bin is used:

g. Put aside the "Z" bracket; it is not needed with the storage bins listed above.

h. Remove the 2 screws from the lower part of the thermostat bracket (plastic) and use them to attach the thermostat extension bracket (stainless) to the thermostat bracket (plastic). See Fig. 4.

Thermostat Bracket (plastic)

Thermostat Extension

Fig. 4

Bracket (stainless)

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents Superior Degree Reliability Issued Revised Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KM-1900SAH air-cooledKM-1900SAH3 air-cooled KM-1900SWH water-cooled KM-1900SWH3 water-cooled KM-1900SRH remote air-cooled KM-1900SRH3 remote air-cooled Dimensions/Connections KM-1900SAH/3KM-1900SWH/3 Unit in. mm II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationIf a Hoshizaki B-800, B-900, or B-1150 storage bin is used Installation of Upper Unit Page For All Models Electrical ConnectionAdditional Warnings for Remote Air-Cooled Model KM-1900SHKM-1900SH3 Checks Before Installation Installation of Remote Condenser UnitLocation Setup Line SetPressurized air for leak testing Factory Line Set ModificationDo not USE Thread Sealant Refrigerant Charge Line Set Exceeding 66 Feet Electrical ConnectionStacking Condenser Unit Water Supply and Drain Connections See , 18, Icemaker DrainKM-1900SAH/3 KM-1900SRH/3Water-Cooled Condenser Connection To An Open Drain SystemConnection to a Closed Loop System Connection To a Closed Loop SystemFinal Checklist Startup III. Cleaning and Maintenance Cleaning and Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance Instructions Preparing the Icemaker for Long StorageDrain the water tank Hoshizaki AMERICA, INC

KM-1900SWH/3, KM-1900SAH/3, KM-1900SRH/3 specifications

The Hoshizaki KM-1900 series, comprising the KM-1900SAH/3, KM-1900SWH/3, and KM-1900SRH/3 models, is recognized in the commercial ice-making industry for its exceptional performance and reliability. These machines are engineered for high efficiency, ensuring that businesses can meet their ice needs without compromising on quality or output.

One of the standout features of the KM-1900 series is its impressive ice production capability. With a production capacity of up to 1900 pounds of ice per day, these machines are designed to cater to high-demand environments such as restaurants, bars, and hotels. The energy-efficient operation of the KM-1900 series not only helps businesses save on electricity costs but also contributes to environmental sustainability, an increasing concern in today’s world.

The machines incorporate a sophisticated air-cooled condenser that aids in maintaining optimal ice production even in warmer conditions. This feature ensures a consistent performance throughout the year, regardless of external temperature fluctuations. Additionally, the KM-1900 models are equipped with a self-cleaning cycle, which simplifies maintenance and extends the longevity of the equipment. This automatic cleaning function helps reduce mineral buildup, thereby guaranteeing the ice’s purity and clarity.

In terms of design, the KM-1900 series showcases a durable stainless-steel exterior, which is both aesthetically pleasing and resistant to corrosion. The sleek design allows for easy integration into any commercial setting. The removable front panels also contribute to easier access for maintenance and service, minimizing downtime.

A significant technological advancement featured in this series is the unique “Kold-Dry” technology, which enhances the freezing process and ensures that the ice produced is harder and lasts longer. This feature is especially beneficial for businesses that require ice to stay intact for extended periods, such as seafood markets or catering services.

Furthermore, the KM-1900SAH/3, KM-1900SWH/3, and KM-1900SRH/3 models come with various ice types. The KM-1900SAH/3 produces traditional cubed ice suitable for drinks, while the KM-1900SWH/3 offers flake ice ideal for perishables. The KM-1900SRH/3 specializes in producing nugget ice, a favorite among beverage enthusiasts.

In summary, the Hoshizaki KM-1900 series stands out for its robust performance, innovative features, energy efficiency, and user-friendly design, making it an ideal choice for any commercial ice-making application.
Top Page Image Contents