Hoshizaki KM-1900SAH/3, KM-1900SRH/3 Important Safety Information, Serious injury, Unit

Page 4

Important Safety Information

Throughout this manual, notices appear to bring your attention to situations which could result in death, serious injury, or damage to the unit.

WARNING

Indicates a hazardous situation which could result in death or

 

serious injury.

CAUTION

Indicates a situation which could result in damage to the unit.

IMPORTANT

Indicates important information about the use and care of the

 

unit.

WARNING

This icemaker should be destined only to the use for which it has been expressly conceived. Any other use should be considered improper and therefore dangerous. The manufacturer cannot be held responsible for injury or damage resulting from improper, incorrect, and unreasonable use.

To reduce the risk of death, electric shock, serious injury, or fire, follow basic precautions including the following:

•Electrical connection must be hard-wired and must meet national, state, and local electrical code requirements. Failure to meet these code requirements could result in death, electric shock, serious injury, fire, or severe damage to equipment.

•This unit requires an independent power supply. See the nameplate for proper voltage and breaker/fuse size. Failure to use a proper breaker or fuse can result in a tripped breaker, blown fuse, or damage to existing wiring. This could lead to heat generation or fire.

•THIS UNIT MUST BE GROUNDED. Failure to properly ground this unit could result in death or serious injury.

•This unit should be disassembled or repaired only by qualified service personnel to reduce the risk of electric shock, injury, or fire.

•Do not make any alterations to the unit. Alterations could result in electric shock, injury, fire, or damage to the unit.

4

Page 3 Page 5
Image 4
Page 3 Page 5
Contents Superior Degree Reliability Issued Revised Hoshizaki AMERICA, INC Contents Important Safety Information Serious injuryIndicates important information about the use and care UnitSpecifications Nameplate Rating KM-1900SAH air-cooledKM-1900SAH3 air-cooled KM-1900SWH water-cooled KM-1900SWH3 water-cooled KM-1900SRH remote air-cooled KM-1900SRH3 remote air-cooled Dimensions/Connections KM-1900SAH/3KM-1900SWH/3 Unit in. mm II. Installation and Operating Instructions Checks Before InstallationHow to Remove Panels See FigSetup LocationIf a Hoshizaki B-800, B-900, or B-1150 storage bin is used Installation of Upper Unit Page For All Models Electrical ConnectionAdditional Warnings for Remote Air-Cooled Model KM-1900SHKM-1900SH3 Checks Before Installation Installation of Remote Condenser UnitLocation Setup Line SetPressurized air for leak testing Factory Line Set ModificationDo not USE Thread Sealant Refrigerant Charge Line Set Exceeding 66 Feet Electrical ConnectionStacking Condenser Unit Water Supply and Drain Connections See , 18, Icemaker DrainKM-1900SAH/3 KM-1900SRH/3Water-Cooled Condenser Connection To An Open Drain SystemConnection to a Closed Loop System Connection To a Closed Loop SystemFinal Checklist Startup III. Cleaning and Maintenance Cleaning and Sanitizing InstructionsCleaning Procedure Sanitizing Procedure Following Cleaning Procedure Maintenance Instructions Preparing the Icemaker for Long StorageDrain the water tank Hoshizaki AMERICA, INC

KM-1900SWH/3, KM-1900SAH/3, KM-1900SRH/3 specifications

The Hoshizaki KM-1900 series, comprising the KM-1900SAH/3, KM-1900SWH/3, and KM-1900SRH/3 models, is recognized in the commercial ice-making industry for its exceptional performance and reliability. These machines are engineered for high efficiency, ensuring that businesses can meet their ice needs without compromising on quality or output.

One of the standout features of the KM-1900 series is its impressive ice production capability. With a production capacity of up to 1900 pounds of ice per day, these machines are designed to cater to high-demand environments such as restaurants, bars, and hotels. The energy-efficient operation of the KM-1900 series not only helps businesses save on electricity costs but also contributes to environmental sustainability, an increasing concern in today’s world.

The machines incorporate a sophisticated air-cooled condenser that aids in maintaining optimal ice production even in warmer conditions. This feature ensures a consistent performance throughout the year, regardless of external temperature fluctuations. Additionally, the KM-1900 models are equipped with a self-cleaning cycle, which simplifies maintenance and extends the longevity of the equipment. This automatic cleaning function helps reduce mineral buildup, thereby guaranteeing the ice’s purity and clarity.

In terms of design, the KM-1900 series showcases a durable stainless-steel exterior, which is both aesthetically pleasing and resistant to corrosion. The sleek design allows for easy integration into any commercial setting. The removable front panels also contribute to easier access for maintenance and service, minimizing downtime.

A significant technological advancement featured in this series is the unique “Kold-Dry” technology, which enhances the freezing process and ensures that the ice produced is harder and lasts longer. This feature is especially beneficial for businesses that require ice to stay intact for extended periods, such as seafood markets or catering services.

Furthermore, the KM-1900SAH/3, KM-1900SWH/3, and KM-1900SRH/3 models come with various ice types. The KM-1900SAH/3 produces traditional cubed ice suitable for drinks, while the KM-1900SWH/3 offers flake ice ideal for perishables. The KM-1900SRH/3 specializes in producing nugget ice, a favorite among beverage enthusiasts.

In summary, the Hoshizaki KM-1900 series stands out for its robust performance, innovative features, energy efficiency, and user-friendly design, making it an ideal choice for any commercial ice-making application.
Top Page Image Contents