Hoshizaki DB-200H instruction manual Start Up

Page 15
7. START UP

7. START UP

1)Start up the icemaker. See the “START UP” instructions on the icemaker.

2)Allow at least three (3) cycles of ice production, and then place a proper container in the ice station.

3)Push the ice dispensing switch to dispense ice cubes.

8. PREPARING THE ICE DISPENSING BIN FOR LONG STORAGE

WARNING

Drain the icemaker and remove all ice from the ice dispensing bin, when shutting off the icemaker/ice dispensing bin for storage. The ice dispensing bin should be cleaned and wiped dry for sanitizing.

1)Shut off the icemaker. See the “PREPARING THE ICEMAKER FOR LONG STORAGE” instructions on the icemaker.

2)Turn off the power supply switches for both the icemaker and the ice dispensing bin after removing all ice.

3)The ice dispensing bin should be cleaned and wiped dry.

15

Image 15
Contents 2001 ISSUEDReliability is a beautiful thingTM JUNEPage CONTENTS I. SPECIFICATIONS 1. NAMEPLATE RATING a with KM-280M or KM-500M 2. DIMENSIONS/CONNECTIONSb with KM-630M Page 1. CHECKS BEFORE INSTALLATION II.INSTALLATION AND OPERATING INSTRUCTIONS2. LOCATION 3. SET UP - See Fig Page 4. ELECTRICAL CONNECTION 6.FINAL CHECK LIST 5. DRAIN CONNECTIONS - See FigFig. 4 Drain Connection 7. START UP III. CLEANING AND MAINTENANCE INSTRUCTIONS 1. CLEANING INSTRUCTIONSaCLEANING PROCEDURE Front Panel Chute Inside of the Bin Agitator Spout of the2.MAINTENANCE 91A4JB10C HOSHIZAKIHOSHIZAKI AMERICA, INC PHONE