Hoshizaki DB-200H instruction manual Location

Page 9
2. LOCATION

2. LOCATION

WARNING

This ice dispensing bin is not intended for outdoor use. Normal operating ambient temperature should be within +45°F to +100°F. To the icemaker, water temperature should be within +45°F to +90°F.

Extended periods of operation at temperatures outside of these limitations may cause unsatisfactory results.

For best operating results:

Ice dispensing bin should not be located next to ovens, grills or other high heat producing equipment.

Location should provide a firm and level foundation for the equipment.

Always avoid a site where dripping is not allowed.

Allow 6" clearance at rear and sides for ease of maintenance and/or service should they be required. More space is needed especially on the right side of the dispensing bin to service the drive system.

CAUTION

The icemaker will not work in sub-freezing temperatures. To prevent damage to the water supply line, always drain the icemaker when air temperature is 32°F or below.

9

Image 9
Contents Reliability is a beautiful thingTM ISSUEDJUNE 2001Page CONTENTS I. SPECIFICATIONS 1. NAMEPLATE RATING a with KM-280M or KM-500M 2. DIMENSIONS/CONNECTIONSb with KM-630M Page 1. CHECKS BEFORE INSTALLATION II.INSTALLATION AND OPERATING INSTRUCTIONS2. LOCATION 3. SET UP - See Fig Page 4. ELECTRICAL CONNECTION 6.FINAL CHECK LIST 5. DRAIN CONNECTIONS - See FigFig. 4 Drain Connection 7. START UP III. CLEANING AND MAINTENANCE INSTRUCTIONS 1. CLEANING INSTRUCTIONSaCLEANING PROCEDURE Front Panel Chute Inside of the Bin Agitator Spout of the2.MAINTENANCE HOSHIZAKI AMERICA, INC HOSHIZAKIPHONE 91A4JB10C