Specifications & Approvals

Tank Electrical Specifications: 750 watts, 115 volts, 6.5 amps.

With 3-wire cord and 3 prong plug provided.

Tank Capacity Specifications: 1/2 Gal: 60 cups per hour

Tank Thermostat Specifications: Adjustable from 160˚-200˚F

F201 Chemical & Mechanical Reduction Filter Specifications: (Use replacement cartridge F-201R) This cartridge (included with the system) provides mechanical and chemical reduction of dirt/rust, taste/odor, chlorine and particulates.

Pressure: 30-125 psi	Temperature: 33˚F–100˚F
Flow Rate: 0.75 gpm	Capacity: 500 gallons

System is tested and certified by NSF International against ANSI/NSF Standard 42 for the reduction of Particulate Class I, Chlorine Class I, Taste and Odor.

Filter Capacity: 500 gallons, depending on local water conditions. Note that while the testing was performed under standard laboratory conditions, actual performance may vary.

Do not use with water that is microbiologically unsafe or of unknown quality without adequate disinfection before or after the system. For cold water use only. Systems must be installed and operated in accordance with the Manufacturer’s recommended procedures and guidelines. See warranty card for warranty. For service and parts, contact your local dealer or In-Sink-Erator directly at 1-800-558-5700.

Contaminant	Average	Product	Average	USEPA	NSF
Reduction	Influent ppm	Water ppm	Reduction	Recommendation	TEST

Taste/Odor/	2.10	0.05	97%	N/A	500180-00
Chlorine	2.10	0.05	97%	N/A	500180-00
Chlorine

Particulates	286667	1683	99%	N/A	500181-00

Application guidelines/Water Supply Parameters for NSF Testing: Service flow of 0.75 gpm, community or private well water supply, water pressure of 30-125 psi, water temperature of 33˚F–100˚F . Except as noted, all testing performed at pH = 7.5±0.5, Flow: 0.75 gpm, Pressure: 60 psi, Temp:20˚±3˚C.

Contact an authorized In-Sink-Erator service agent for repairs or replacement components.

Grounding Instructions

Electric Shock Hazard. Using an ungrounded or improperly connected appliance can result in serious injury or death from electric shock.

This appliance must be grounded. This appliance is equipped with a cord having an equipment grounding conductor and a grounding pin. The plug must be connected to an appropriate outlet that is properly installed and grounded in accordance with all local codes and ordinances. Please size electrical supply appropriately and check rating plate for electrical requirements. Do not modify the plug provided with the appliance - if it will not fit the outlet, have a proper outlet installed by a qualified electrician. Check with a qualified electrician or serviceman if you are in doubt as to whether the appliance is properly grounded.

HC1100, GN1100 specifications

The InSinkErator GN1100 and HC1100 are standout models in the realm of food waste disposers, designed to enhance kitchen efficiency and sustainability. Both models integrate advanced features and technologies that make them a reliable choice for modern households seeking convenience and performance.

The GN1100 is designed for powerful food waste grinding with its robust 3/4 horsepower induction motor. This motor operates quietly while effectively handling a variety of food scraps, including fibrous vegetables and small bones. The grind chamber is constructed with a stainless steel grind component, ensuring durability and resistance to corrosion, thus extending the lifespan of the unit.

One of the key features of the GN1100 is its sound insulation technology, which minimizes noise during operation. Homeowners can enjoy a peaceful kitchen environment while maintaining their waste disposal routines. The disposal unit also features a continuous feed design, allowing for ongoing grinding as food scraps are added, which significantly speeds up the process of disposing of waste.

The HC1100 model takes innovation a step further by incorporating the added benefit of hot water on demand. With a 2.5-gallon hot water tank, the HC1100 delivers instant hot water, reaching temperatures of up to 200°F. This feature is particularly useful for tasks such as food preparation, cleaning dishes, and sanitizing surfaces. Users can enjoy the convenience of having hot water readily available right at their sink, enhancing their overall kitchen experience.

Both models feature a quick and easy installation process, which can often be done without the need for professional plumbing help. The units come with an easy-to-understand instruction manual, making it convenient for DIY enthusiasts to set up.

Safety and performance are crucial aspects of the InSinkErator GN1100 and HC1100. Each unit is equipped with a jam-proof system that prevents clogs and ensures smooth operation. Additionally, the built-in overload protection feature safeguards against motor burnout, enhancing reliability and user confidence.

In summary, the InSinkErator GN1100 and HC1100 offer a combination of power, efficiency, and cutting-edge technology, making them ideal for anyone looking to efficiently manage food waste while also enjoying the luxury of instant hot water in the kitchen. With their focus on durability and user-friendly design, these disposers are a smart investment for environmentally conscious households aiming to simplify their daily chores and minimize waste.