InSinkErator GN1100, HC1100 Installation, page 5, Care and Use, Test the Water Connection

Page 12

The Installation, page 5 of 5

10. Test the Water Connection

Test the water connection to see if it is watertight. If it is not, relieve water pressure by turning off the water supply, and adjust or tighten fittings as necessary. Note that water must flow from the dispenser faucet to test all connections.

Note: Ensure both hot and cold side are checked on the HC model.

DO NOT PLUG IN THE TANK.

11. Plug in the Tank

Once the tank is plugged in, it will take between 10 and 15 minutes for the water to reach its target temperature. During the heating cycle, you can expect to hear gurgling or hissing sounds within the tank. This is normal.

Electric Shock Hazard. This appliance must be properly grounded. Using an ungrounded appliance can result in serious injury or death from electric shock. Improper connection of the equipment-grounding conductor can result in a risk of electric shock. Check with a qualified electrician if you are in doubt as to whether the outlet is properly grounded. Do not modify the plug provided with the appliance. If it will not fit in the outlet, have the proper outlet installed by a qualified electrician.

Care and Use

To Adjust the Thermostat:

Electric Shock Hazard. To prevent electrical shock, disconnect power before removing access cover to service the thermostat.

Scalding Hazard. Do not allow water to boil. May result in severe burns.

On the front of the tank there is an access panel. Unscrew the holding screw and locate the temperature control dial.

The thermostat is pre-set at the factory to approximately 190˚ F. If a thermostat adjustment is required, turn knob clockwise 1/2 dial mark to increase the water temperature and counterclockwise 1/2 dial mark to decrease the water temperature.

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents Instant hot water dispenser Know what these safety symbols mean Important Safety Instructions AdjustmentSpecifications & Approvals Grounding InstructionsParts & Components Tank Mounting Bracket and ScrewsPlanning, Preparation and Tools Tools you may need includePlumbing & Electrical Requirements ApplianceInstallation, page 1 Turn off the water supply Straighten the copper tubingMount the dispenser faucet Mount the Hot Water TankInstallation, page 2 Connecting the Tank to the Dispenser FaucetMount the Head & Filter Bracket Installation, page 3 Make Plumbing ConnectionsModel GN1100 Installation, page 4 Model HC1100Connect to Cold Water Supply Line Fill the TankInstallation, page 5 To Adjust the ThermostatCare and Use Test the Water ConnectionTo Reset the Thermal Cut-Out To Replace the FilterCleaning the Faucet and Tank Seasonal Storage and Draining the TankDisconnect electricity Troubleshooting Problem Possible Cause What to doWarranty Information Other Products Available from In-Sink-Erator Autres produits disponibles auprès de In-Sink-EratorOtros productos de In-Sink-Erator

HC1100, GN1100 specifications

The InSinkErator GN1100 and HC1100 are standout models in the realm of food waste disposers, designed to enhance kitchen efficiency and sustainability. Both models integrate advanced features and technologies that make them a reliable choice for modern households seeking convenience and performance.

The GN1100 is designed for powerful food waste grinding with its robust 3/4 horsepower induction motor. This motor operates quietly while effectively handling a variety of food scraps, including fibrous vegetables and small bones. The grind chamber is constructed with a stainless steel grind component, ensuring durability and resistance to corrosion, thus extending the lifespan of the unit.

One of the key features of the GN1100 is its sound insulation technology, which minimizes noise during operation. Homeowners can enjoy a peaceful kitchen environment while maintaining their waste disposal routines. The disposal unit also features a continuous feed design, allowing for ongoing grinding as food scraps are added, which significantly speeds up the process of disposing of waste.

The HC1100 model takes innovation a step further by incorporating the added benefit of hot water on demand. With a 2.5-gallon hot water tank, the HC1100 delivers instant hot water, reaching temperatures of up to 200°F. This feature is particularly useful for tasks such as food preparation, cleaning dishes, and sanitizing surfaces. Users can enjoy the convenience of having hot water readily available right at their sink, enhancing their overall kitchen experience.

Both models feature a quick and easy installation process, which can often be done without the need for professional plumbing help. The units come with an easy-to-understand instruction manual, making it convenient for DIY enthusiasts to set up.

Safety and performance are crucial aspects of the InSinkErator GN1100 and HC1100. Each unit is equipped with a jam-proof system that prevents clogs and ensures smooth operation. Additionally, the built-in overload protection feature safeguards against motor burnout, enhancing reliability and user confidence.

In summary, the InSinkErator GN1100 and HC1100 offer a combination of power, efficiency, and cutting-edge technology, making them ideal for anyone looking to efficiently manage food waste while also enjoying the luxury of instant hot water in the kitchen. With their focus on durability and user-friendly design, these disposers are a smart investment for environmentally conscious households aiming to simplify their daily chores and minimize waste.
Top Page Image Contents