InSinkErator HC1100, GN1100 owner manual Parts & Components, Tank Mounting Bracket and Screws

Page 5

Parts & Components

In general, you'll be installing a faucet above-sink, with a filter assembly and a heating unit below-sink. You'll also be connecting all of the plumbing. Under the sink you'll need a grounded electrical service outlet, a connection to the cold water line (not included), and enough space to install the filter and tank assemblies.

2.

4.

3.

1.

8.

5.

10.

6.9.

1.Dispenser Faucet (HC Model shown)

2.DuraTankHot Water Tank

3.Filter Head & Bracket Assembly

4.F-201 Filter Cartridge

5.Two 3/8" x 3' Polyethylene Tubes

6.3/8" Brass Nut, Ferrule, and Tube Insert

7.6" Filter Vent Tube (not shown)

8.3/8" to 1/4" Quick-Connect Union Fitting (for GN1100 models)

or 3/8" to 1/4" Quick-Connect "Y" Fitting (for HC1100 Models)

9.Dispenser Faucet Mount O-Ring, Clamp Plate, 6 mm Nut and Installation Tool

10.Tank Mounting Bracket and Screws

Here's what a typical complete installation should look like when you're done: Note: Component placement should be such to avoid electrical outlet.

For Reference Only

SinkTop™ Switch

sold separately.

5

Image 5
Contents Instant hot water dispenser Know what these safety symbols mean Adjustment Important Safety InstructionsGrounding Instructions Specifications & ApprovalsTank Mounting Bracket and Screws Parts & ComponentsTools you may need include Planning, Preparation and ToolsAppliance Plumbing & Electrical RequirementsTurn off the water supply Straighten the copper tubing Installation, page 1Mount the dispenser faucet Mount the Hot Water TankMount the Head & Filter Bracket Installation, page 2Connecting the Tank to the Dispenser Faucet Model GN1100 Installation, page 3Make Plumbing Connections Model HC1100 Installation, page 4Connect to Cold Water Supply Line Fill the TankTo Adjust the Thermostat Installation, page 5Care and Use Test the Water ConnectionTo Replace the Filter To Reset the Thermal Cut-OutDisconnect electricity Cleaning the Faucet and TankSeasonal Storage and Draining the Tank Problem Possible Cause What to do TroubleshootingWarranty Information Otros productos de In-Sink-Erator Other Products Available from In-Sink-EratorAutres produits disponibles auprès de In-Sink-Erator

HC1100, GN1100 specifications

The InSinkErator GN1100 and HC1100 are standout models in the realm of food waste disposers, designed to enhance kitchen efficiency and sustainability. Both models integrate advanced features and technologies that make them a reliable choice for modern households seeking convenience and performance.

The GN1100 is designed for powerful food waste grinding with its robust 3/4 horsepower induction motor. This motor operates quietly while effectively handling a variety of food scraps, including fibrous vegetables and small bones. The grind chamber is constructed with a stainless steel grind component, ensuring durability and resistance to corrosion, thus extending the lifespan of the unit.

One of the key features of the GN1100 is its sound insulation technology, which minimizes noise during operation. Homeowners can enjoy a peaceful kitchen environment while maintaining their waste disposal routines. The disposal unit also features a continuous feed design, allowing for ongoing grinding as food scraps are added, which significantly speeds up the process of disposing of waste.

The HC1100 model takes innovation a step further by incorporating the added benefit of hot water on demand. With a 2.5-gallon hot water tank, the HC1100 delivers instant hot water, reaching temperatures of up to 200°F. This feature is particularly useful for tasks such as food preparation, cleaning dishes, and sanitizing surfaces. Users can enjoy the convenience of having hot water readily available right at their sink, enhancing their overall kitchen experience.

Both models feature a quick and easy installation process, which can often be done without the need for professional plumbing help. The units come with an easy-to-understand instruction manual, making it convenient for DIY enthusiasts to set up.

Safety and performance are crucial aspects of the InSinkErator GN1100 and HC1100. Each unit is equipped with a jam-proof system that prevents clogs and ensures smooth operation. Additionally, the built-in overload protection feature safeguards against motor burnout, enhancing reliability and user confidence.

In summary, the InSinkErator GN1100 and HC1100 offer a combination of power, efficiency, and cutting-edge technology, making them ideal for anyone looking to efficiently manage food waste while also enjoying the luxury of instant hot water in the kitchen. With their focus on durability and user-friendly design, these disposers are a smart investment for environmentally conscious households aiming to simplify their daily chores and minimize waste.