Manitowoc Ice S600C, SY0674C, S1470C manual Model SY0684C or SD0672C Models SY1474C or SD1472C, Logo

Page 2

MODEL - SY0684C or SD0672C

MODELS - SY1474C or SD1472C

1.Place the panel on a flat, horizontal surface with the stainless steel side (exterior) facing up.

Note: The screw hole on the face of the panel should be in the lower right-hand corner when you are facing the panel, as pictured below:

2.Make sure the white PVC film is removed from the front panel.

3.Use the Alcohol Prep Pad found in the kit to gently clean surface of stainless steel panel, focusing on the central area highlighted below.

6.Examine the urethane logo. Notice that it is covered on one side by white backing paper and on the other by a thinner semi- transparent masking film. Peel back the solid, white backing paper slowly, making sure the urethane logo remains attached to the thinner semi-transparent masking film. This must be done very carefully, as the logo has a tendency to remain attached to the solid white backing paper, and the logo itself could be divided into several pieces.

Models SY1474, SD1472

Models SY0684, SD0672

4.Find the large L-shaped template in the kit. Remove the plastic static cling from the paper backing.

5.Carefully place the L-shaped static cling template in the lower left-hand corner of the panel as shown in the illustration below:

Note: Verify template rests on the top edge of the bottom molding and is aligned with left edge of the panel.

Models SY1474, SD1472

Models SY0684, SD0672

Manitowoc Ice, Inc.

Semi-transparent film

Logo

White paper

Verify the entire logo remains attached to the semi-transparent film as you peel it back

7.Carefully place the semi-transparent film and logo within the inside edges of the template, making sure the edges of the film are flush with the inside edges of the template, as illustrated below.

Note: Be sure that the logo is aligned properly. It is difficult to re- adjust the logo once the adhesive makes contact with the stainless steel.

2110 South 26th Street, P.O. Box 1720, Manitowoc, WI 54221-1720 USA

000002851

Telephone 920-682-0161, Fax - Sales: 920-683-7589, Service/Parts: 920-683-7585, Other: 920-683-7879

Rev 01

Web Site - www.manitowocice.com

5/25/10

Image 2
Contents Models SY1474C or SD1472C KFC and Taco Bell Logo Application InstructionsModel SY0674C or SD0672C Logo Model SY0684C or SD0672C Models SY1474C or SD1472CModels SY1474, SD1472 Models SY0684, SD0672