Extron electronic FOX 500 DA6 Firmware upgrade, Audio Adjustment area, Audio Output Level area

Page 26

Remote Control, cont’d

Audio Adjustment area

Audio Gain/Attenuation slider — Click and drag the Audio Gain/Attenuation slider control to select the input audio gain or attenuation value, from -18 dB to +10 dB in 1.0 dB increments.

Audio Output Level area

Audio Output Level radio buttons — Click either the Consumer Level (-10 dBV) or Professional Level (+4 dBu) radio button to select the output audio level.

NWhen you make an audio output level change, the setting is changed in the receiver(s). The master receiver reports the changes to the DA via the optional Optical 2 cable connected betweeen the DA and the master receiver.

If your computer is connected to either of the DA's serial ports, and the Optical 2 cable is not connected between the master receiver and the DA in your system, the program cannot report the output audio level in the control program's Audio Adjustment area. You can change the level, but the program cannot report the changes. The program shows the Set Consumer (or Professional) level message to indicate that the output level command is control only, not and indication (figure 3-7). The message is displayed for approximately 1 second.

Figure 3-7 — Alternate Audio Adjustment area indication

Firmware upgrade

Firmware can be upgraded via either of the unit's serial ports by opening the Extron Firmware Loader utility from the Windows- based control program.

NWhen firmware upgrades are available, they are unique to the unit; a DA firmware upgrade and a separate receiver upgrade for the Rx unit.

You must connect directly to the unit to be updated. Upload replacement firmware as follows:

1. Visit the Extron web site, www.extron.com, click the Download Center tab, and then click the Firmware link (figure 3-8). Select the appropriate firmware file(s) to download and copy it (them) to your computer. Note the folder to which you save the firmware file(s).

Figure 3-8 — Location of firmware upgrade files

2.

In the Windows Explorer or other file browser, double-click

 

the downloaded executable (*.exe) file(s) to self-extract the

 

firmware file(s).

3.

Connect a Windows-based computer to either serial port

 

(rear panel Remote RS-232 or front panel Configuration)

 

of the unit to be updated. See chapter 2, "Installation and

 

Operation", for more details.

4.

Start the FOX 500 Control Program. See "Starting the

 

program", on page 3-16.

5.

Click Tools > Update Firmware. The Extron Firmware

 

Loader appears (figure 3-9).

3-22 FOX 500 DA6 • Remote Control

FOX 500 DA6 • Remote Control 3-23

Page 25 Page 27
Image 26
Page 25 Page 27
Contents FOX 500 DA6 Precautions Extron’s Warranty安全须知 中文 FCC Class a NoticeQuick Start Guide FOX 500 DA6 StepQuick Start Guide FOX 500 DA6 cont’d Chapter Two Installation and OperationFOX 500 DA6 Table of Contents Table of Contents, contd Appendix a Reference InformationAbout the FOX 500 DA6 IntroductionAbout this Manual Features Introduction, cont’dTwo FOX 500 DA6Mounting the Unit Installation and OperationTabletop placement Rack mountingInstallation and Operation, cont’d ConnectionsAlarm outputs port For remote monitoring Front panel Configuration port Rear panel serial ports connection Alarm outputs connectionFront Panel Indicators This port is RS-232 only, with the following protocolsInstallation and Operation, cont’d System Operation ThreeRear Panel Remote RS-232 Ports Remote ControlFront Panel Configuration Port Simple Instruction Set ControlUnit-initiated messages Remote Control, cont’dSymbols Front panel operationsUsing the command/response table Error responsesTimeout Command/response table for SIS commands Remote Memory presetsTotal pixels List sync frequencyAuto memory Front panel lock Executive modeAudio mute Auto imageResets Information requestsStarting the program Remote Control, cont’d Windows-based Program ControlInstalling the software Memory Preset area Mute area Status areaAdvanced Configuration area Video Adjustment areaOutput Configuration area Audio Output Level area Firmware upgradeAudio Adjustment area Open window AAppendix a Specifications Reference InformationGeneral Reference Information, cont’dAudio input Reference Information, cont’d Part Numbers Reference Information, cont’d

FOX 500 DA6 specifications

The Extron FOX 500 DA6 is a state-of-the-art digital distribution amplifier designed to deliver exceptional performance for professional audio and video applications. This unit is particularly well-suited for environments where high-quality signal distribution is crucial, such as corporate settings, educational institutions, and control rooms.

One of the key features of the FOX 500 DA6 is its ability to distribute HDMI and multi-format video signals over long distances without compromising quality. The device supports resolutions up to 4K at 60 Hz, ensuring that users can leverage the latest high-definition video formats. This capability is especially important for modern digital signage and AV integration, where visual clarity is paramount.

The FOX 500 DA6 employs cutting-edge HDCP compliance, which simplifies content sharing across various devices while maintaining security protocols. This feature ensures that protected content can be distributed seamlessly, a fundamental requirement in many professional settings.

Another significant aspect of the FOX 500 DA6 is its flexible input and output configuration. The device comes with six outputs, allowing for multiple display connections without the need for additional hardware. This versatility makes the HDMI distribution amplifier ideal for scenarios where multiple monitors or projectors are in use.

In terms of ease of use, the unit is equipped with an intuitive user interface that simplifies setup and operation. It also supports automatic switching between inputs, a valuable feature for users who require quick transitions between sources. Technicians will appreciate the unit's ability to maintain signal integrity, with features like signal amplification and equalization that compensate for signal loss over longer cable runs.

The FOX 500 DA6 is designed for reliability and durability, meeting the rigorous standards expected in commercial environments. Its compact form factor allows for easy integration into racks or other setups without taking up excessive space.

Lastly, the Extron FOX 500 DA6 supports various control options, including RS-232 and TCP/IP, enabling seamless integration into existing control systems. Whether managing a large-scale AV system or a simple setup, this device offers the performance and flexibility necessary to meet diverse user needs.

In summary, the Extron FOX 500 DA6 is a powerful digital distribution amplifier that caters to the demands of modern AV applications with its advanced features, reliable performance, and user-friendly design.
Top Page Image Contents