Reference Information

Specifications

NThe analog RGB input signal is digitized pixel for pixel in the transmitter, sent digitally through the fiber cable, and converted back to analog RGB in the receiver.

NThe analog audio signal(s) is (are) digitized in the transmitter, sent through the fiber cable, and converted back to analog audio in the receiver.

Optical specifications

Number/type

6 fiber optic outputs

NOnly one fiber is required to transmit video, audio, and unidirectional data. A second fiber is required to transmit return data for bidirectional control/communication on receiver 1.

Connectors	6 LC connectors
Operating distance	30 km (18.75 miles) with singlemode (SM)
	cables with a FOX 500 DA6 SM
	0.15 km (492’) with multimode (MM)
	cables with a FOX 500 DA6 MM

NOperating distance is approximate. These are typical distances. The maximum distance may be greater than these typical numbers depending on factors such as fiber type, fiber bandwidth, connector splicing, losses, modal or chromatic dispersion, environmental factors, and kinks.

Nominal peak wavelength	850 nm for FOX 500 DA6 MM,
	1310 nm for FOX 500 DA6 SM
Data rate	4.25 Gbps
Transmission power
Singlemode	-5 dBm, typical
Multimode	-5 dBm, typical
Maximum receiver sensitivity
Singlemode	-18 dBm, typical
Multimode	-12 dBm, typical
Optical loss budget
Singlemode	13 dB, maximum
Multimode	7 dB, maximum

Video

Gain	Unity
Pixel data bit depth	8 bits per channel, 3 channels (R, G, B)
Maximum resolution	1600x1200 @ 60 Hz, digitized pixel by
	pixel; higher resolutions up to 2048x1120,
	undersampled

Video input and loop-through

Number/signal type	1 VGA-UXGA RGBHV, RGBS, RGsB,
	RsGsBs input
	1 VGA-UXGA RGBHV, RGBS, RGsB,
	RsGsBs loop-through
Connectors	1 x 5 female BNC or (1) female 15-pin HD
	for input
	(1) female 15-pin HD for loop-through
Nominal level	0.7 Vp-p for RGB
Minimum/maximum levels	Analog: 0.3 V to 1.5 Vp-p with no offset
Impedance	75 ohms
Horizontal frequency	24 kHz to 100 kHz
Vertical frequency	40 Hz to 120 Hz
Return loss	<-40 dB @ 5 MHz

NThese transceivers are class 1 laser products. They meet the safety regulations of IEC-60825, FDA 21, CFR 1040.10, and FDA 21 CFR 1040.11.

Video output — See optical specifications above.

Sync

Input type	Autodetect RGBHV, RGBS, RGsB, RsGsBs
Input level	2.5 V to 5.0 Vp-p
Input impedance	10k ohms
Polarity	Positive or negative (follows input or can
	be set by user)

Audio

Gain
Range	Adjustable, -18 dB to +10 dB
Default

Captive screw connector

	Unbalanced output: -6 dB;
	balanced output: 0 dB
Mini stereo jack	Unbalanced output: 0 dB

A-2

FOX 500 DA6 • Reference Information

A-3

FOX 500 DA6 specifications

The Extron FOX 500 DA6 is a state-of-the-art digital distribution amplifier designed to deliver exceptional performance for professional audio and video applications. This unit is particularly well-suited for environments where high-quality signal distribution is crucial, such as corporate settings, educational institutions, and control rooms.

One of the key features of the FOX 500 DA6 is its ability to distribute HDMI and multi-format video signals over long distances without compromising quality. The device supports resolutions up to 4K at 60 Hz, ensuring that users can leverage the latest high-definition video formats. This capability is especially important for modern digital signage and AV integration, where visual clarity is paramount.

The FOX 500 DA6 employs cutting-edge HDCP compliance, which simplifies content sharing across various devices while maintaining security protocols. This feature ensures that protected content can be distributed seamlessly, a fundamental requirement in many professional settings.

Another significant aspect of the FOX 500 DA6 is its flexible input and output configuration. The device comes with six outputs, allowing for multiple display connections without the need for additional hardware. This versatility makes the HDMI distribution amplifier ideal for scenarios where multiple monitors or projectors are in use.

In terms of ease of use, the unit is equipped with an intuitive user interface that simplifies setup and operation. It also supports automatic switching between inputs, a valuable feature for users who require quick transitions between sources. Technicians will appreciate the unit's ability to maintain signal integrity, with features like signal amplification and equalization that compensate for signal loss over longer cable runs.

The FOX 500 DA6 is designed for reliability and durability, meeting the rigorous standards expected in commercial environments. Its compact form factor allows for easy integration into racks or other setups without taking up excessive space.

Lastly, the Extron FOX 500 DA6 supports various control options, including RS-232 and TCP/IP, enabling seamless integration into existing control systems. Whether managing a large-scale AV system or a simple setup, this device offers the performance and flexibility necessary to meet diverse user needs.

In summary, the Extron FOX 500 DA6 is a powerful digital distribution amplifier that caters to the demands of modern AV applications with its advanced features, reliable performance, and user-friendly design.