Extron electronic FOX 500 DA6 user manual Introduction, cont’d, Features

Page 8

Introduction, cont’d

The DA also buffers the RGB input and loops it through on a 15-pin HD connector for use by a local monitor. The DA can handle an RGBHV, RGBS, RGsB, or RsGsBs input signal.

NThe DA can send and receive the proprietary signal(s) to and from any compatible Extron receiver or switcher. These compatible products include the FOX 500 Rx (RGB) receiver, the FOX 500 Rx DVI receiver, and the Fiber Matrix 6400 matrix switcher.

The connected receiver(s) convert the proprietary signal(s) back to video (either RGB or DVI, depending on the receiver), audio, and serial RS-232 communication, and output the signals locally. If RS-232 return communications are implemented (a second fiber optic cable is installed), the receiver connected to DA output 1 sends a proprietary serial communication signal back to the DA on the second fiber optic cable. For video resolutions up to 1600 x 1200, the receivers' video outputs are a perfect pixel-for-pixel or digital recreation of the video signal input to the DA.

The receivers have image and audio adjustments and test patterns that can be set locally or via an RS-232 link and sent to the DA, which, in turn, sends them to the transmitter on the fiber link. The transmitter has image, audio, and fiber light status and lost-light alarm indicators.

The FOX 500 DA is rack mountable and has an internal switching power supply for worldwide power compatibility.

Features

Ultra high performance — Offers up to six perfect, pixel- by-pixel,, RGBHV video transmissions to compatible receiver(s). The DA can handle resolutions up to 1600 x 1200 at 60 Hz. Higher resolutions can be transmitted, but with some loss of video quality and undersampled.

Video input — The DA inputs RGBHV, RGBS, RGsB, or RsGsBs on BNC connectors or a 15-pin HD connector.

Six active and individually isolated outputs — The FOX 500 DA6 uses active signal splitting to maintain equal transmiter power to all outputs, maximizing distance capabilities by ensuring full availablility of optical loss budget for each output.

Analog loop-through on DA — The DA has an analog loop- through on a 15-pin HD connector that allows connection of a local monitor.

System video output — The video portion of the optical video output can be decoded to either RGB video or DVI video, depending on the receiver connected.

Audio input — The DA inputs balanced or unbalanced stereo audio on a 3.5 mm, 5-pole captive screw terminal or a 3.5 mm mini jack.

Audio input gain/attenuation — The input audio level can be adjusted within a range of -18 dB attenuation to +10 dB gain via the master receiver's front panel or the RS-232 link.

Links monitoring — The front panel has indicators for monitoring image and audio transmission and both fiber optic links.

Loss-of-light alarms — The rear panel has discrete outputs that indicate if either of the fiber optic links have suffered a loss of the light signal.

Windows-based control program — For RS-232 remote control from a PC, the Extron Windows®-based control software provides a graphical interface and drag-and-drop/point-and-click operation.

Simple Instruction Set (SIS™) — The DA uses Extron’s SIS for easy remote control operation.

Upgradable firmware — The firmware that controls the unit's operation can be upgraded in the field via an RS-232 link, without taking the unit out of service. Firmware upgrades are available for download on the Extron Web site, www.extron.com, and they can be installed using the Windows-based control program.

Memory presets — 30 memory presets are a time-saving feature that lets you store input size and position settings relative to a specific input resolution. You can then recall those settings, when needed, with a few simple steps via the master receiver's front panel or the RS-232 link.

Rack mounting — The unit is rack mountable in any conventional 19" wide rack, using the included rack mounting brackets.

Power — The 100 VAC to 240 VAC, internal power supply provides worldwide power compatibility.

1-4

FOX 500 DA6 • Introduction

FOX 500 DA6 • Introduction

1-5

Page 7 Page 9
Image 8
Page 7 Page 9
Contents FOX 500 DA6 Precautions Extron’s Warranty安全须知 中文 FCC Class a NoticeQuick Start Guide FOX 500 DA6 StepQuick Start Guide FOX 500 DA6 cont’d Chapter Two Installation and OperationFOX 500 DA6 Table of Contents Table of Contents, contd Appendix a Reference InformationAbout the FOX 500 DA6 IntroductionAbout this Manual Features Introduction, cont’dTwo FOX 500 DA6Installation and Operation Tabletop placementMounting the Unit Rack mountingInstallation and Operation, cont’d ConnectionsAlarm outputs port For remote monitoring Front panel Configuration port Rear panel serial ports connection Alarm outputs connectionFront Panel Indicators This port is RS-232 only, with the following protocolsInstallation and Operation, cont’d System Operation ThreeRemote Control Front Panel Configuration PortRear Panel Remote RS-232 Ports Simple Instruction Set ControlRemote Control, cont’d SymbolsUnit-initiated messages Front panel operationsUsing the command/response table Error responsesTimeout Command/response table for SIS commands Memory presets Total pixelsRemote List sync frequencyFront panel lock Executive mode Audio muteAuto memory Auto imageResets Information requestsStarting the program Remote Control, cont’d Windows-based Program ControlInstalling the software Memory Preset area Mute area Status areaAdvanced Configuration area Video Adjustment areaOutput Configuration area Audio Output Level area Firmware upgradeAudio Adjustment area Open window AAppendix a Specifications Reference InformationGeneral Reference Information, cont’dAudio input Reference Information, cont’d Part Numbers Reference Information, cont’d

FOX 500 DA6 specifications

The Extron FOX 500 DA6 is a state-of-the-art digital distribution amplifier designed to deliver exceptional performance for professional audio and video applications. This unit is particularly well-suited for environments where high-quality signal distribution is crucial, such as corporate settings, educational institutions, and control rooms.

One of the key features of the FOX 500 DA6 is its ability to distribute HDMI and multi-format video signals over long distances without compromising quality. The device supports resolutions up to 4K at 60 Hz, ensuring that users can leverage the latest high-definition video formats. This capability is especially important for modern digital signage and AV integration, where visual clarity is paramount.

The FOX 500 DA6 employs cutting-edge HDCP compliance, which simplifies content sharing across various devices while maintaining security protocols. This feature ensures that protected content can be distributed seamlessly, a fundamental requirement in many professional settings.

Another significant aspect of the FOX 500 DA6 is its flexible input and output configuration. The device comes with six outputs, allowing for multiple display connections without the need for additional hardware. This versatility makes the HDMI distribution amplifier ideal for scenarios where multiple monitors or projectors are in use.

In terms of ease of use, the unit is equipped with an intuitive user interface that simplifies setup and operation. It also supports automatic switching between inputs, a valuable feature for users who require quick transitions between sources. Technicians will appreciate the unit's ability to maintain signal integrity, with features like signal amplification and equalization that compensate for signal loss over longer cable runs.

The FOX 500 DA6 is designed for reliability and durability, meeting the rigorous standards expected in commercial environments. Its compact form factor allows for easy integration into racks or other setups without taking up excessive space.

Lastly, the Extron FOX 500 DA6 supports various control options, including RS-232 and TCP/IP, enabling seamless integration into existing control systems. Whether managing a large-scale AV system or a simple setup, this device offers the performance and flexibility necessary to meet diverse user needs.

In summary, the Extron FOX 500 DA6 is a powerful digital distribution amplifier that caters to the demands of modern AV applications with its advanced features, reliable performance, and user-friendly design.
Top Page Image Contents