Extron electronic FOX 500 DA6 user manual Reference Information, cont’d, Audio input, General

Page 30

Reference Information, cont’d

Frequency response

20 Hz to 20 kHz, ±0.5 dB

THD + Noise

0.10% @ 1 kHz at nominal level

S/N

>80 dB at maximum output (unweighted)

CMRR

65 dB @ 20 Hz to 20 kHz

Audio bits per sample

18 bits per channel, 2 channels (L, R)

Sampling rate

48 kHz

Audio input

Number/signal type

2 inputs (mixed): 1 balanced stereo;

 

1 unbalanced stereo or 2 unbalanced mono

Connectors

(1)

3.5 mm captive screw connector, 5 pole

 

(1)

3.5 mm mini stereo jack

Impedance

18k ohms unbalanced,

 

20k ohms balanced, DC coupled

Nominal level

+4 dBu (1.23 Vrms), -10 dBV (316 mVrms)

Maximum level

+17 dBV, (unbalanced) at 1% THD+N

N0 dBu = 0.775 Vrms, 0 dBV = 1 Vrms, 0 dBV 2 dBu

Audio output — See FOX 500 Rx receiver specifica- tions.

Control/remote

Serial control ports

 

Control

1 RS-232, 3.5 mm captive screw connector,

 

5 pole (3 pins are used) (rear panel)

 

1 RS-232, 2.5 mm mini stereo jack (front

 

panel)

Pass-through

1 RS-232, 3.5 mm captive screw connector,

 

5 pole (3 pins are used) (rear panel); in

 

parallel with 1 RS-232, 2.5 mm mini stereo

 

jack (front panel)

Baud rate and protocol

 

Control

9600 baud, 8 data bits, 1 stop bit, no parity

Pass-through

9600 to 38400 baud

Serial control pin configurations

Captive screw connectors:

1 = Tx, 2 = Rx, 3 = GND

Mini stereo jack: tip = Tx, ring = Rx, sleeve = GND

Program control

Extron’s control/configuration program

 

for Windows®

 

Extron’s Simple Instruction Set (SIS)

General

Power

100 VAC to 240 VAC, 50/60 Hz, 11 watts,

 

internal

Temperature/humidity

Storage: -40 to +158 °F (-40 to +70 °C) /

 

10% to 90%, noncondensing

 

Operating: +32 to +122 °F (0 to +50 °C) /

 

10% to 90%, noncondensing

Cooling

Convection, vented, vents on top and side

 

panels

Rack mount

Yes, with included brackets

Enclosure type

Metal

Enclosure dimensions

1.7” H x 17.4” W x 9.5” D

 

(1U high, full rack wide)

 

4.3 cm H x 44.2 cm W x 24.1 cm D

 

(Depth excludes connectors.)

Product weight

3.9 lbs (1.8 kg)

Shipping weight

7 lbs (4 kg)

DIM weight

 

USA/Canada

7 lbs (4 kg)

International

8 lbs (4 kg)

Vibration

ISTA 1A in carton

 

(International Safe Transit Association)

Listings

UL, CUL

Compliances

CE, FCC Class A, VCCI, AS/NZS, ICES,

 

FDA Class 1

MTBF

30,000 hours

Warranty

3 years parts and labor

NAll nominal levels are at ±10%.

NSpecifications are subject to change without notice.

A-4

FOX 500 DA6 • Reference Information

FOX 500 DA6 • Reference Information

A-5

Image 30
Contents FOX 500 DA6 Precautions Extron’s Warranty安全须知 中文 FCC Class a NoticeQuick Start Guide FOX 500 DA6 StepChapter Two Installation and Operation FOX 500 DA6 Table of ContentsQuick Start Guide FOX 500 DA6 cont’d Table of Contents, contd Appendix a Reference InformationIntroduction About this ManualAbout the FOX 500 DA6 Features Introduction, cont’dTwo FOX 500 DA6Mounting the Unit Installation and OperationTabletop placement Rack mountingInstallation and Operation, cont’d ConnectionsAlarm outputs port For remote monitoring Front panel Configuration port Rear panel serial ports connection Alarm outputs connectionFront Panel Indicators This port is RS-232 only, with the following protocolsInstallation and Operation, cont’d System Operation ThreeRear Panel Remote RS-232 Ports Remote ControlFront Panel Configuration Port Simple Instruction Set ControlUnit-initiated messages Remote Control, cont’dSymbols Front panel operationsError responses TimeoutUsing the command/response table Command/response table for SIS commands Remote Memory presetsTotal pixels List sync frequencyAuto memory Front panel lock Executive modeAudio mute Auto imageResets Information requestsRemote Control, cont’d Windows-based Program Control Installing the softwareStarting the program Memory Preset area Mute area Status areaVideo Adjustment area Output Configuration areaAdvanced Configuration area Firmware upgrade Audio Adjustment areaAudio Output Level area Open window AAppendix a Specifications Reference InformationReference Information, cont’d Audio inputGeneral Reference Information, cont’d Part Numbers Reference Information, cont’d

FOX 500 DA6 specifications

The Extron FOX 500 DA6 is a state-of-the-art digital distribution amplifier designed to deliver exceptional performance for professional audio and video applications. This unit is particularly well-suited for environments where high-quality signal distribution is crucial, such as corporate settings, educational institutions, and control rooms.

One of the key features of the FOX 500 DA6 is its ability to distribute HDMI and multi-format video signals over long distances without compromising quality. The device supports resolutions up to 4K at 60 Hz, ensuring that users can leverage the latest high-definition video formats. This capability is especially important for modern digital signage and AV integration, where visual clarity is paramount.

The FOX 500 DA6 employs cutting-edge HDCP compliance, which simplifies content sharing across various devices while maintaining security protocols. This feature ensures that protected content can be distributed seamlessly, a fundamental requirement in many professional settings.

Another significant aspect of the FOX 500 DA6 is its flexible input and output configuration. The device comes with six outputs, allowing for multiple display connections without the need for additional hardware. This versatility makes the HDMI distribution amplifier ideal for scenarios where multiple monitors or projectors are in use.

In terms of ease of use, the unit is equipped with an intuitive user interface that simplifies setup and operation. It also supports automatic switching between inputs, a valuable feature for users who require quick transitions between sources. Technicians will appreciate the unit's ability to maintain signal integrity, with features like signal amplification and equalization that compensate for signal loss over longer cable runs.

The FOX 500 DA6 is designed for reliability and durability, meeting the rigorous standards expected in commercial environments. Its compact form factor allows for easy integration into racks or other setups without taking up excessive space.

Lastly, the Extron FOX 500 DA6 supports various control options, including RS-232 and TCP/IP, enabling seamless integration into existing control systems. Whether managing a large-scale AV system or a simple setup, this device offers the performance and flexibility necessary to meet diverse user needs.

In summary, the Extron FOX 500 DA6 is a powerful digital distribution amplifier that caters to the demands of modern AV applications with its advanced features, reliable performance, and user-friendly design.