Grindmaster P200E, RAPS200E Cleaning, Thermostat Adjustment, After Each Brew, Every Day

Page 6

Thermostat Adjustment

The thermostat controls the water temperature in the tank. Factory setting is 195 degrees F. This is the ideal temperature for brewing coffee. Water should never boil in the tank. If water is boiling in the tank, adjust the temperature appropriately.

Standard Mechanical Thermostat:

1)Shut off power and unplug brewer.

2)Open cover, locate thermostat mounted on tank. (Refer to Figure B).

3)Turn the shaft counter clockwise to increase temperature, clockwise to decrease temperature.

4)If the maximum temperature adjustment needs to be increased, insert a small flat screwdriver into the shaft.Turn the calibration screw counter clockwise to increase the maximum temperature.

5)Reinstall top cover with screw then plug unit in, return to use.

Cleaning

Figure B

! WARNING: BURN HAZARD

HOT LIQUIDS AND SURFACES ARE PRESENT IN THIS EQUIPMENT. TO AVOID BURNS, USE CAUTION WHEN CLEANING. RINSE HOT PARTS WITH COLD WATER BEFORE CLEANING. USE GLOVES OR A HEAVY CLOTH WHEN REMOVING HOT PARTS FROM BREWER.

After Each Brew:

1)Dispose of grounds and rinse brew basket.

2)Rinse Shuttles and Airpots before reuse.

Every Day:

1)Wash brew basket with warm soapy water.

2)Remove spray head located above brew basket, using gloves or a heavy towel. Wash off coffee oils and clean any plugged holes.

3)Clean Shuttles and Airpots with warm soapy water and a brush or towel.

4)Wipe exterior of brewer with a damp cloth. Do not use abrasives which will scratch surface.

5)If the Shuttle is to be left on the warmer all night, fill it with water to avoid coffee oil burn-in.

P200/RAPS200 Brewers

Page 5

Page 5 Page 7
Image 6
Page 5 Page 7
Contents Water Hook-up Set-Up/PositionPage Electric hook-up Start-upP200/RAPS200 Brewers Operation StartAdjustments Brew Volume AdjustmentAfter Each Brew CleaningThermostat Adjustment Every DayUrn cleaners that have been used successfully Weekly or Bi-Weekly, Depending on Use P200 OnlyService To Drain The Water TankTo Remove The Heater Troubleshooting Filling, Heating, and Brewing Troubleshooting Filling, Heating, and Brewing con’t Heating ProblemsProblem Possible Cause Service Check Remedy Brew volume erratic Brewing ProblemsProblem Possible Cause Service Check Remedy Brew volume too Large or too smallExploded View for the P200-E Exploded View for the P200 G version only Exploded View for the RAPS200-E Exploded View for the RAPS200 G version only Rough-In Drawing for the P200-E Rough-In Drawing for the RAPS200-E Wiring Diagram for P200-E/RAPS200-E Page Warranty Grindmaster Corporation

RAPS200E, P200E specifications

The Grindmaster RAPS200E and P200E are exceptional grinding machines designed to meet the demands of the coffee and food industry. With a focus on precision and durability, both models are engineered to deliver superior grinding performance, making them essential tools for cafes, restaurants, and food service operations.

One of the standout features of the RAPS200E and P200E is their high-quality grinding technology. These grinders utilize advanced burr grinding mechanisms that ensure a consistent grind size, a crucial factor for achieving optimal flavor extraction in coffee brewing. The burrs are constructed from premium materials, providing longevity and minimal heat generation during grinding to preserve the integrity and flavor of the beans.

Both models are equipped with a user-friendly digital control panel that allows operators to easily adjust grind settings. The intuitive interface enables users to select different grind sizes suited for various brewing methods, from espresso to drip coffee. This flexibility caters to a diverse range of preferences, enhancing the customer experience.

Another notable characteristic of the RAPS200E and P200E is their robust build quality. These grinders are designed for heavy-duty use, featuring sturdy construction that can withstand the rigors of a busy commercial environment. The components are crafted with precision, reducing maintenance needs and prolonging the lifespan of the equipment.

In terms of technology, both models incorporate innovative features such as automatic dosing. This ensures that the right amount of coffee grounds is dispensed each time, significantly reducing waste and enhancing consistency. Additionally, the RAPS200E includes a grinding timer, allowing operators to customize the grinding duration based on specific recipes or preferences.

The Grindmaster RAPS200E and P200E also prioritize safety and ease of use. They come with safety interlocks that prevent operation when the hopper is removed or improperly assembled. This not only protects users but also ensures that maintenance can be performed safely and efficiently.

Furthermore, the ergonomic design of these grinders enhances user comfort. They are compact and aesthetically pleasing, making them suitable for any workspace. The low noise operation is an added benefit, ensuring a pleasant atmosphere in busy café settings.

In conclusion, the Grindmaster RAPS200E and P200E are exemplary coffee grinders that combine performance, reliability, and user-centric design. Their cutting-edge features and technologies make them indispensable for any establishment committed to delivering high-quality coffee and food experiences. With these grinders, baristas and chefs can trust that they are equipped with the best tools for their craft, ensuring customer satisfaction and operational efficiency.
Top Page Image Contents