Custom Panel Dimensions

CUSTOM PANEL FOR MODEL

ZBD6890

This dishwasher requires a field installed 3/4" thick custom panel and custom handle. An installation template is packed with these models and may be obtained in advance. Order Pub. No. 31-30569. Complete panel installation instructions are included on the template.

Countertop		Custom
Countertop		Panel Size
		Panel Size
Cabinets
Side	A
View	A
	Floor		B
Bottom of		3/4" Max.	B
Bottom of		3/4" Max.	Figure II
Adjacent Cabinetry			Figure II

STEP A—Determine custom panel height

1.Measure dimension A, from the underside of the countertop to the bottom of adjacent cabinets.

2.Subtract 1/4". This allows a 1/4" clearance gap between the underside of the countertop and the top of the dishwasher door.

HEIGHT = A – 1/4"

NOTE: 30-1/16" minimum panel height is required to cover the door frame. Panel height varies depending on installation. Consideration must be given to door swing clearance above the toekick.

STEP B—Determine custom panel width

1.Measure dimension B, the rough opening width.

2.Subtract 1/4" for clearance (1/8" on each side).

WIDTH = B – 1/4"

NOTE: The most common panel dimensions are 30-1/4"H and 23-3/4"W.

IMPORTANT: To ensure optimum door balance performance, it is recommended that the door panel weight be no more than 14 lbs.