How to set the oven for self-cleaning
After a clean cycle
Stainless Steel Range
The clean cycle takes about 5 hours plus about 30 minutes to cool down.
1Push in the CLEAN selector button.
2 Set the thermostat dial to CLEAN.
• Cooling blower turns on.
• The OVEN ON light and HEATING light turn on.
Thermostat dial
• The DOOR LOCKED light turns on.
3When cleaning has finished, push the OFF selector button.
The blower and the OVEN ON light will turn off once the cycle has finished.
The door latch will open automatically after the oven temperature falls below 550°F.
If white spots remain, remove them with warm | If the oven is not clean after one clean cycle, | |
sudsy water and rinse thoroughly with a vinegar | repeat the cycle. | |
and water mixture. These deposits are usually a | You may notice some white ash in the oven. | |
salt residue that cannot be removed by the | ||
Wipe it up with a damp cloth after the oven | ||
clean cycle. | ||
cools. | ||
|
20