JXBC57 Kit, Check Parts Supplied | GE Monogram ZGU365 specification

JXBC57 Kit

For Outdoor Remote Blower Locations

The blower and motor assembly can be mounted on an outside wall. This kit provides a means to mount the blower outside with a protective cover.

Materials Required (not supplied)

•Approved liquid tight service connections for use between the wire compartment on the base and inside the structure.

•7 wire nuts or other approved connectors.

•Six 5/16" dia. fasteners compatible with the type of material the base is being fastened to.

•3-1/4" x 10" to 6" round transition.

•3-1/4 x 10" duct, (or 6" round) sufficient length to reach the outdoor installation location.

•Electrical cable and connectors, sufficient length to connect the downdraft vent to the remote blower location. 14-guage min. is recommended, must conform to local codes.

Tools required:

•Pencil or chalk

•Measuring tape

•Drill with appropriate bits

•Phillips head screwdriver

•1/4" Nut driver

•Wire nuts

•Safely glasses

Step1

Check

Parts

Supplied

•Separate the cover from the base assembly by removing 5 screws. Retain screws.

• Check to be sure all parts are present.

Package of screws

4 Hanger Brackets

Cover

Cover Plate

Outlet Plate

Base

Assembly

Junction Box

Outlet Pan

Damper