Shelves and Bins
Stainless Steel Refrigerator
Basket removal (bottom drawer)
To Remove the 2-Piece Basket:
1Open the bottom freezer drawer until it stops.
2Pull the divider forward until the rear locating tabs are out of the slots. Turn the divider slightly to the side to release the front locating tabs and lift out.
3The freezer basket rests on the metal slide brackets and is held in place with swing locks.
4Turn the swing locks from horizontal to vertical position.
5Lift the front of the basket up, rotate it toward you, and bring it straight up to remove.
6Lift the back portion of the basket up and out of the drawer.
When Replacing the 2-Piece Basket:
1 Place the rear of the basket onto the metal slide brackets. There will be 2 pins on each underside of the back that will align for securing the basket.
2 Seat the front of the basket onto the metal slide brackets and over the swing locks.
3 Turn the swing locks from vertical to horizontal |
|
position to lock the basket in place. | Appearance may vary |
4 Turn the divider slightly to one side so the tabs on the front fit into the vent slots on the basket. Position the divider so the back locating tabs snap into place in the back vent slots.
Adjustable bins on the door
Adjustable bins can easily be carried from refrigerator to work area.
To remove: Lift bin straight up, then pull out.
To replace or relocate: Slide in the bin just above the molded door supports, and push down.
The bin will lock in place.
The snugger helps prevent tipping, spilling
or sliding of small items stored on the door shelf.
Grip the finger hold near the rear of the snugger and move it to fit your needs.
Non- Adjustable bins on the door
Non- Adjustable beverage rack
To remove: Lift the bin straight up, then pull out.
To replace: Engage the bin in the molded supports on the door and push down. It will lock in place.
To remove: Lift the rack straight up, then pull out.
To replace: Engage the rack in the molded supports on the door and push down. It will lock in place.
14