Other Controls
Stainless Steel Refrigerator
How TurboCool™ works
TurboCool rapidly cools
the refrigerator compartment in
order to more quickly cool foods. Use TurboCool when adding
a large amount of food to the refrigerator compartment, putting away foods after they have been sitting out at room temperature or when putting away warm leftovers. It can also be used if the refrigerator has been without power for an extended period.
Once activated, the compressor will turn on immediately and the fans will cycle on and off at high speed as needed for 8 hours.
The compressor will continue to run until the refrigerator compartment cools to approximately 34°F (1°C), then it will cycle on and off to maintain this setting. After
8 hours, or if TURBOCOOl is pressed again, the refrigerator compartment will return to the original setting.
How to use TurboCool
1Press TURBOCOOl. The refrigerator temperature display will show TC.
2After TurboCool is complete, the refrigerator compartment will return to the original setting.
NotES:
•The refrigerator temperature cannot be changed during turboCool.
•The freezer temperature is not affected during turboCool.
•When opening the refrigerator door during turboCool, the fans will continue to run if they have cycled on.
Door Alarm
The door alarm will sound
if either door is open for more than 2 minutes. The beeping sound will stop when you close the door.
9