Detergent Control

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

Detergent usage and water hardness are two factors that contribute greatly to how efficiently your dishmachine will operate. Using detergent in the proper amount can become, in time, a source of substantial savings. A qualified water treatment spe- cialist can tell you what is needed for maximum efficiency from your detergent, but you should still know some basics so you’ll understand what they are talking about.

First, you must understand that hard water greatly effects the performance of the dishmachine. Water hardness is the amount of dissolved calcium and magnesium in the water supply. The more dissolved solids in the water, the greater the water hard- ness. Hard water works against detergent, thereby causing the amount of detergent required for washing to increase. As you use more detergent, your costs for operating the dishmachine will increase and the results will decrease. The solids in hard water also may build-up as a scale on wash and rinse heaters, decreasing their ability to heat water. Water temperature is important in removing soil and sanitizing dishes. If the water cannot get hot enough, your results may not be satisfactory. This is why Jackson recommends that if you have installed the machine in an area with hard water, that you also install some type of water treatment equipment to help remove the dissolved solids from the water before it gets to the dishmachine.

Second, hard water may have you adding drying agents to your operating cycle to prevent spotting, when the real problem is deposited solids on your ware. As the water evaporates off of the ware, the solids will be left behind to form the spotting and no amount of drying agent will prevent this. Again, using treated water will undoubtedly reduce the occurrences of this prob- lem.

Third, treated water may not be suitable for use in other areas of your operation. For instance, coffee made with soft water may have an acid or bitter flavor. It may only be feasible to install a small treatment unit for the water going into the dishmachine itself. Discuss this option with your qualified water treatment specialist.

Even after the water hardness problems have been solved, there still must be proper training of dishmachine operators in how much detergent is to be used per cycle. Talk with your water treatment specialist and detergent vendor and come up with a complete training program for operators. Using too much detergent has as detrimental effects as using too little. The proper amount of detergent must be used for job. It is important to remember that certain menu items may require extra detergent by their nature and personnel need to be made aware of this. Experience in using the dishmachine under a variety of conditions, along with good training in the operation of the machine, can go a long way in ensuring your dishmachine operates as effi- ciently as possible.

Certain dishmachine models require that chemicals be provided for proper operation and sanitization. Some models even require the installation of third-party chemical feeders to introduce those chemicals to the machine. Jackson does not recom- mend or endorse any brand name of chemicals or chemical dispensing equipment. Contact your local chemical distributor for questions concerning these subjects.

Some dishmachines come equipped with integral solid detergent dispensers. These dispensers are designed to accommodate detergents in a certain sized container. If you have such a unit, remember to explain this to your chemical distributor upon first contacting them.

As explained before, water temperature is an important factor in ensuring that your dishmachine functions properly. The data plate located on each unit details what the minimum temperatures must be for either the incoming water supply, the wash tank and the rinse tank, depending on what model of dishmachine you have installed. These temperatures may also be followed by temperatures that Jackson recommends to ensure the highest performance from you dishmachine. However, if the minimum requirements are not met, the chances are your dishes will not be clean or sanitized. Remember, a dish can look clean, but it may not be sanitized. Instruct your dishmachine operators to observe the required temperatures and to report when they fall below the minimum allowed. A loss of temperature can indicate a much larger problem such as a failed heater or it could also indicate that the hot water heater for your operation is not up to capacity and a larger one may need to be installed.

There are several factors to consider when installing your dishmachine to ensure that you get the best possible results from it and that it operates at peak efficiency for many years. Discuss your concerns with your local chemical distributor and water treatment specialist before there is a problem.

JFT Series Technical Manual 7610-002-77-38

Issued: 03-16-2006 Revised: N/A

JFT, JFT-S specifications

Jackson JFT is an advanced Java library designed for efficiently handling JSON data. Built on the popular Jackson core framework, Jackson JFT (JSON for Transformation) enhances Jackson's capabilities by providing powerful features for transforming JSON structures without losing the flexibility and performance that developers appreciate.

One of the main characteristics of Jackson JFT is its seamless integration with the Jackson ecosystem. It maintains compatibility with existing Jackson modules, allowing developers to leverage the extensive functionality of the framework. This integration ensures that users can easily transition to Jackson JFT, taking advantage of its additional features while retaining access to the wide range of tools already available in Jackson.

A key feature of Jackson JFT is its focus on JSON transformation. The library allows for easy manipulation and transformation of JSON data structures through a set of intuitive APIs. Developers can define transformations in a clean and readable manner, making the process of converting or mapping JSON data to different structures straightforward. This is particularly beneficial in scenarios where data might need to be reshaped for compatibility with different systems, APIs, or for front-end display purposes.

Jackson JFT also supports advanced data binding, allowing it to bind JSON data directly to Java objects and vice versa. This feature streamlines the process of parsing JSON data and is invaluable for applications that require frequent data interchange. The library handles various data types, ensuring that complex nested structures are managed efficiently.

Performance is another essential characteristic of Jackson JFT. The library is optimized to handle large datasets without significant overhead, making it suitable for applications with heavy data processing needs. Its efficient handling of memory and processing power results in faster transformations and reduces latency in web applications.

Furthermore, Jackson JFT ensures reliability and robustness in data handling. With built-in error handling and validation mechanisms, developers can easily identify issues in JSON data and ensure data integrity throughout the transformation process.

In summary, Jackson JFT stands out as a powerful tool within the Jackson ecosystem, designed to simplify JSON transformation and data handling. Its seamless integration, advanced data binding capabilities, performance optimizations, and reliability make it an ideal choice for developers looking to work with JSON data in Java applications. Whether it's for web services, data interchange, or application configuration, Jackson JFT provides a modern solution for effective JSON processing.