Operating Instructions

SECTION 2: INSTALLATION/OPERATION INSTRUCTIONS

Before the first start up of the machine, check that all tools, cleaning rags, and all foreign parts are removed from the operation areas of the machine.

PREPARATION: Before proceeding with the start-up of the unit, verify the following:

1.Ensure wash arms, rinse arms, pump suction strainers, pan strainers, and curtains are all installed correctly.

2.Close all doors on dishmachine.

3.Close the drain valve(s).

4.Open the main stop valves for water.

5.Pull out all Emergency Stop Switches. Switch on the main switch at the control panel.

POWER UP: To energize the unit, turn on the power at the service breakers. The voltage should have been previously verified as being correct. If not, the voltage will have to be verified.

For electrical booster operation, ensure that the electric booster heater’s power switch is in the “ON” position. Can be seen when electrical sections lower dress panel is removed. Check that the power light is illuminated.

For steam booster heater operation, ensure switch below front control door is in the “ON” position. The light beside of the switch should be illuminated to indicate on and the light beside of the steam guage will turn on and off depending as to whether steam is cycling to the booster.

WARE PREPARATION: Proper preparation of ware will help ensure good results and less re-washes. If not done properly, ware may not come out clean and the efficiency of the dishmachine will be reduced. It is important to remember that a dishmachine is not a garbage disposal and that simply throwing unscraped dishes into the machine simply defeats the purpose altogether of washing the ware. Scraps should be removed from ware prior to being loaded into a rack. Pre-rinsing and pre-soaking are good ideas, especially for silverware and casserole dishes. Place cups and glasses upside down in the track so that they do not hold water during the cycle. The dishmachine is meant not only to clean, but to sanitize as well, to destroy all of the bac- teria that could be harmful to human beings. In order to do this, ware must be properly prepared prior to being placed in the machine.

FILLING THE WASH TUB: Close all doors. Press the white “On Fill/Heat” button. As soon as the green indication lamp “Tank Filled” lights up, the filling and heating cycle is com- pleted and the machine is ready for operation. The operation cycle can begin. Press the green “Start” button at the switch cabinet door or press the green “Start” button at the feed- ing or discharge ends. Now the transport belt can be loaded with dishes in the feeding section.

Two transport speeds can be selected. During operation, the transport speed can be changed from low to high or vice versa. Transport speed “low” moves slower through the machine which is more suitable for heavily soiled dishware. Transport speed “high” moves quicker though the machine and is more suitable for lightly soiled dishware. The transport speed must be selected according to the soiling of the dishware, the belt load and the washing results.

BREAK SWITCHING: By means of the red “Stop” button (located on the electrical control box, and at each end of the machine), the operation cycle is temporarily interrupted, (i.e. the wash pumps and transport are switched off), however the tank heatings continue running. Press the black push button “Off Fill/Heat” at the switch cabinet door. The green indication lamp “Tank Filled” continuous lighting, as the machine is still ready for operation. The operation cycle is only temporarily interrupted and remains ready for operation. The machine is in stand-by operation and can start operation at any time. After an interruption of opera- tion, you can continue the wash cycle by pressing the white “On Fill/Heat” button. Press the white push button “On Fill/Heat” at the switch cabinet door or the feeding or discharge end to continue washing.

JFT Series Technical Manual 7610-002-77-38

Issued: 03-16-2006 Revised: N/A

JFT, JFT-S specifications

Jackson JFT is an advanced Java library designed for efficiently handling JSON data. Built on the popular Jackson core framework, Jackson JFT (JSON for Transformation) enhances Jackson's capabilities by providing powerful features for transforming JSON structures without losing the flexibility and performance that developers appreciate.

One of the main characteristics of Jackson JFT is its seamless integration with the Jackson ecosystem. It maintains compatibility with existing Jackson modules, allowing developers to leverage the extensive functionality of the framework. This integration ensures that users can easily transition to Jackson JFT, taking advantage of its additional features while retaining access to the wide range of tools already available in Jackson.

A key feature of Jackson JFT is its focus on JSON transformation. The library allows for easy manipulation and transformation of JSON data structures through a set of intuitive APIs. Developers can define transformations in a clean and readable manner, making the process of converting or mapping JSON data to different structures straightforward. This is particularly beneficial in scenarios where data might need to be reshaped for compatibility with different systems, APIs, or for front-end display purposes.

Jackson JFT also supports advanced data binding, allowing it to bind JSON data directly to Java objects and vice versa. This feature streamlines the process of parsing JSON data and is invaluable for applications that require frequent data interchange. The library handles various data types, ensuring that complex nested structures are managed efficiently.

Performance is another essential characteristic of Jackson JFT. The library is optimized to handle large datasets without significant overhead, making it suitable for applications with heavy data processing needs. Its efficient handling of memory and processing power results in faster transformations and reduces latency in web applications.

Furthermore, Jackson JFT ensures reliability and robustness in data handling. With built-in error handling and validation mechanisms, developers can easily identify issues in JSON data and ensure data integrity throughout the transformation process.

In summary, Jackson JFT stands out as a powerful tool within the Jackson ecosystem, designed to simplify JSON transformation and data handling. Its seamless integration, advanced data binding capabilities, performance optimizations, and reliability make it an ideal choice for developers looking to work with JSON data in Java applications. Whether it's for web services, data interchange, or application configuration, Jackson JFT provides a modern solution for effective JSON processing.