Electrical connection
WARNING
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
All electrical work should be performed by a qualified electrician in strict accordance with national regulations (for USA:
Ensure that power to the appliance is off while installation or repair work is performed.
Verify that the voltage, load and circuit rating information found on the data plate (located behind the grease filters), match the household electrical supply before installing the hood.
Use only with ventilation hood
If there is any question concerning the electrical connection of this appliance to your power supply, please consult a licensed electrician or contact Miele’s Technical Service Department.
WARNING:
THIS APPLIANCE MUST BE GROUNDED
Grounding Instructions
This appliance must be grounded. In the event of an electrical short circuit, grounding reduces the risk of electric shock by providing a path of least resistance. This appliance is equipped with a cord having a grounding wire with a grounding plug. The plug must be plugged into an outlet that is properly installed and grounded.
WARNING - Improper grounding can result in a risk of electric shock.
If there is any doubt, have the electrical system of the house checked by a qualified electrician.
Do not use an extension cord. If the power supply cord is too short, have a qualified electrician install an outlet near the appliance.
Important
The hood comes equipped with a 4 ft (1.2 m) power cord with a NEMA
120 VAC, 60 Hz, 15 A power outlet.
35