Operation (Automatic and Manual modes)
Activating and altering the charcoal filter operating hours counter
Charcoal filters are needed for recirculation mode.
The operating hours counter for the charcoal filter needs to be activated once and the operating hours counter needs to be set to suit the kind of cooking you do:
Use the On/Off control to switch the fan off.
Touch the
The Charcoal filter symbol and one of the fan power levels will flash.
Fan power level indicators 1 to IS show the time set:
1 | 120 hours |
2 | 180 hours |
3 | 240 hours |
IS | Deactivated |
Touch the relevant sensor to select the duration required.
Confirm your choice by touching the Charcoal filter control .
All the indicator lamps will go out.
If you do not confirm within 4 minutes, the cooker hood will revert to the old setting.
Reading the filter operating hours counter
To check the percentage of time set already used
Touch the On/Off control to switch the fan on.
Press and hold the Grease filter control or the Charcoal filter control .
One or more of the power level indicators will flash.
The number of fan power level indicators flashing shows the percentage of the operating time which has already been used up.
1 | 25 % |
1 and 2 | 50 % |
1 to 3 | 75 % |
1 to IS | 100 % |
The number of operating hours used remains in the memory, even when the appliance is switched off or there is a power cut.
22