Modes of operation
Con@ctivity 2.0 function
Automatic control
The cooker hood has a communication facility which enables the automatic operation of the cooker hood depending on the operational state of the hob.
To make use of the communication facility the hob must be fitted with a Con@ctivity 2.0 Stick .
Refer to the installation instructions for the Con@ctivity 2.0 Stick to check whether it is compatible with your hob.
To use the Con@ctivity 2.0 function, a wireless connection must be established between the hob and the cooker hood (see "Activating Con@ctivity 2.0").
The hob transmits information about its operational status via a radio signal to the cooker hood.
–When the hob is switched on, the hob lighting comes on independently and then after a short time the fan also comes on.
–During cooking the cooker hood automatically sets the power level according to the number of cooking zones in operation and their power levels.
–After switching the hob off the fan and the hob lighting will switch off automatically after a specified period of time.
See "Operation" for detailed information about this function.
13