Operation (Automatic and Manual modes)
Operating hours counters
The number of hours the appliance has been in operation is stored in memory.
When the Grease filter symbol or the Charcoal filter symbol lights up, the operating hours counters are signalling that the filters need to be cleaned or changed. Further information about cleaning and changing the filters and resetting the operating hours counter can be found under "Cleaning and care".
Altering the operating hours counter for the grease filters
You can set the operating hours counter for the grease filter to suit the type of cooking you do.
The grease filter operating hours counter is set at the factory for 30 hours.
–Select a shorter time of 20 hours if you fry a lot.
–If you only cook occasionally we recommend that you still select a short time because grease which has built up gradually over a long period of time will harden on the filter and make cleaning more difficult.
–Select a longer time of 40 or 50 hours if you use very little fat for cooking.
Use the On/Off control to switch the fan off.
Touch the
The Grease filter symbol and one of the fan power level indicators will flash.
Fan power level indicators 1 to IS show the time set:
1 | 20 hours |
2 | 30 hours |
3 | 40 hours |
IS | 50 hours |
Touch the relevant sensor to select the duration required.
Confirm your choice by touching the Grease filter control .
All the indicator lamps will go out
If you do not confirm within 4 minutes, the cooker hood will revert to the old setting.
21