Activating Con@ctivity 2.0
Activating the hob
While the cooker hood is searching for a signal, start activating the hob. More information about this can be found in the operating instructions for the hob.
When connection has been established, 2 and 3 will light up constantly on the cooker hood.
Confirm activation of the cooker hood with the
Confirm activation of the hob. Con@ctivity 2.0 is now ready to use.
If you do not confirm your selection within 4 minutes, activation will not take place.
Activation check
To check whether Con@ctivity 2.0 has been activated for the cooker hood:
Switch off the fan and hob lighting.
Touch the
Then touch in turn,
–the 1 control,
–then the IS control,
–then the lighting control .
If Con@ctivity 2.0 has been activated, the indicators for levels 2 and 3 will be lit up constantly.
If Con@ctivity 2.0 has not been activated, the indicators for levels 2 and 3 will flash at the same time.
To come out of checking mode, touch the
To check whether Con@ctivity has been activated on the hob, see the operating instructions for the hob.
If connection cannot be established despite activating the Con@ctivity function on the cooker hood and hob, the function must be deactivated on both appliances and then the procedure repeated.
35