Miele 09 767 780 Activating Con@ctivity, Installing the Con@ctivity 2.0 Stick

Activating Con@ctivity 2.0

Installing the Con@ctivity 2.0 Stick

In order to use the Con@ctivity 2.0 function, the hob must first be fitted with the Con@ctivity 2.0 Stick.

Please read the separate installation instructions supplied with the Con@ctivity 2.0 Stick.

Activating Con@ctivity 2.0

Wireless connection must be activated between the cooker hood and the hob before Con@ctivity 2.0 can be used.

Both appliances must be installed and operational.

You only need to carry out the activation procedure once. If the appliances are disconnected from the electricity supply, during a power cut for example, they will still remain activated.

To establish the wireless connection, the cooker hood and hob must be activated at the same time.

First activate the cooker hood, then the hob.

Activating the cooker hood

Switch off the fan, hob lighting and hob.

Touch the run-on option control  for approx. 10 seconds, until 1 lights up in the power level display.

Then touch in turn,

–the 1 control,

–then the IS control,

–then the lighting control .

If Con@ctivity 2.0 has not been activated, the indicators for levels 2 and 3 will flash at the same time.

To activate Con@ctivity 2.0 touch the IS control.

2 will light up constantly and 3 will flash. The search for a signal starts.

Meanwhile, start the activation of the hob.

34