CARE
Grease filters
CLEANING METAL SELF- SUPPORTING GREASE FILTERS
• The filters must be cleaned every 2 months of operation, or more frequently for particularly heavy usage, and can be washed in a dishwasher.
•Remove the filters one at a time holding them up with one hand and pulling the handle downwards with the other hand at the same time.
•Wash the filters, taking care not to bend them. Allow them to dry before refitting.
•When refitting the filters, make sure that the handle is visible on the outside.
Activated charcoal filter (Recirculating version)
These filters (not supplied with the rangehood)are not washable and cannot be regenerated, and must be replaced approximately every 4 months of operation, or more frequently with heavy us- age.
REPLACING OF THE FILTER
•Remove the metal grease filters.
•Remove the saturated charcoal filter by releasing the fixing hooks
•Fit the new filter and fasten it in its correct position.
•Put the metal grease filters in their seats.
Lighting
LIGHT REPLACEMENT
20 W halogen light.
• Remove the 2 screws fixing the Lighting support, and pull it out of from the Hood.
•Extract the lamp from the Support.
•Replace with another of the same type, making sure that the two pins are properly inserted in the lamp holder socket holes.
•Replace the Support, fixing it in place with the two screws re- moved as above.
EN |
| 1 |
| 12 |