Franke Consumer Products FDF 364 W Chimney assembly, Electrical Connection, Upper exhaust Chimney

Page 10

	ELECTRICAL CONNECTION
•	Remove the cover from the Field Wiring Compartment with a	Green
	phillips screwdriver.	Green
	phillips screwdriver.	Ground
•	Feed the Power Supply Cable through the electrical knockout.	screw
	Connect the Power Supply Cable to the range- hood cable. At-
	tach the Power Supply Cable grounding lead to the green screw
	provided. Attach the White lead of the power supply to the
	White lead of the rangehood with a twist-on type wire connec-
	tor. Attach the Black lead of the power supply to the Black
	lead of the rangehood with a twist-on type wire connector.
•	Replace the cover.

Chimney assembly

	Upper exhaust Chimney
	• Slightly widen the two sides of the upper flue and hook them	2.1
	behind the brackets 7.2.1, making sure that they are well	2
	seated.	2
	seated.
	• Secure the sides to the brackets using the 4 screws 12c sup-	2.2
	plied.
	• Make sure that the outlet of the extensions pieces is aligned
	with the chimney outlets.

Lower exhaust Chimney

•Slightly widen the two sides of the flue and hook them be- tween the upper flue and the wall, making sure that they are well seated.

•Fix the lower part laterally to the hood body using the 2 screws 12c supplied.

Ground wire

Power supply cable

7.2.1

12c

12c

EN		1
EN		10

Image 10

Contents Vision Index Read and Save These Instructions Venting RequirementsR N I N G Electrical RequirementsR N I N G USE InstallationRecommendations and Suggestions CareDimensions and Main Parts Dimensions ComponentsInstallation Wall drilling and bracket fixingDucted Version AIR Exhaust System Mounting the hood bodyConnections Ductless Version AIR OutletUpper exhaust Chimney Chimney assemblyElectrical Connection Lower exhaust ChimneyUSE Control boardActivated charcoal filter Recirculating version CareGrease filters LightingTable DES Matières 114Lire ET Conserver CES Instructions Exigences DE Ventilation ÉvacuationAvertissement Fiche Technique Électrique117 Utilisation Conseils ET SuggestionsEntretien Dimensions et Principales Pièces Dimensions ComposantesPerçage de la paroi et fixation des brides Sortie D’AIR Version Aspirante Montage du corps de la hotteBranchements Sortie D’AIR Version FiltranteCheminée supérieure Montage de la cheminéeBranchement Électrique Cheminée inférieureTableaux des commandes UtilisationFiltres anti-graisse Remplacement DES AmpoulesSoin ET Entretien Filtre anti-odeur Version filtrante43600393201