Mounting the hood body | Vr |
• Before attaching the hood body, tighten the two screws Vr lo- |
|
cated on the hood body mounting points. |
|
• Hook the hood body onto the screws 12a. |
|
• Fully tighten support screws 12a. |
|
• Adjust screws Vr to level the hood body. | 12a |
|
Note: The Hood body should be secured to wall studs. If neces- sary, install a wood support behind the dry wall, flush mounted between 2 studs. This will provide the necessary structure and support for mounting.
Connections
DUCTED VERSION AIR EXHAUST SYSTEM
When installing the ducted version, connect the hood to the chimney using a rigid 6” duct.
•Install the damper 10 ø 6”.
•Fix the duct in position using sufficient pipe clamps (not sup- plied).
DUCTLESS VERSION AIR OUTLET
•Put connection 15 into the connection support 7.3.
•Insert the connection extension pieces laterally 14.1 in connec- tion 15.
•Make sure that the outlet of the extension pieces 14.1 is hori- zontally and vertically aligned with the chimney outlets.
•Connect the air outlet connection 15 to the hood body outlet using a rigid ø 6” duct. (not supplied)
•Ensure that the activated charcoal filters have been inserted.
10
14.1
15
EN |
| 9 |
| 9 |