Roberts Radio Vintage manual Manual Tuning - DAB, Signal strength display - DAB

Page 12
Manual Tuning - DAB

Manual Tuning - DAB

Manual tuning allows you to tune directly to the various DAB Band III channels. UK DAB stations are currently located in the range 11B to 12D.

1.Press and hold in the Info button until the display shows 'Manual Tune'. Press and release the Tuning control to select this function.

2.Rotate the Tuning control to select the required DAB channel.

3.Press and release the Tuning control. The open block in the signal strength graph shows you the minimum signal strength needed for good DAB reception. The signal blocks will go up and down showing the changing signal strength as you adjust the telescopic aerial or the radio position. Any new radio stations found on the tuned DAB multiplex will be added to the list stored in the radio.

4.Press and release the Tuning control to return to the normal tuning mode.

1

1-4

Signal strength display - DAB

1. Repeatedly press and release the Info button until the lower line of the display shows signal strength.

2.Position your radio and try adjusting the aerial so as to give maximum number of black rectangles on the signal strength display. Normally, the best reception will be found with the aerial fully extended.

3.The clear unfilled rectangle indicates minimum signal level required for satisfactory reception.

1

11

Image 12
Contents Please read this manual before use Enjoy ListeningROBERTS Contents Controls Top Controls Rear 16.DC input socket 17.Battery compartment screw15 16 14. Telescopic aerial 15.Line output socket Page Page Using the AC adaptor Operating your radio - DAB Welcome to DABSelecting a station - DAB 2,3Display modes - DAB Secondary services - DAB Finding new radio stations - DABManual Tuning - DAB Signal strength display - DABDynamic Range Control settings - DAB Operating your radio - Search tuning - FM Manual tuning - FM Display modes - FM Favourite button Recalling your favourite stationPreset stations - DAB and FM 2,4Stereo / Mono setting - FM headphones only Scan sensitivity setting - FM Software version System reset Headphone socket Auxiliary input socketLine out socket 3.5mm Jack A Few Words about Batteries… Rechargeable batteries1.Keep batteries out of the reach of children USB socket for software upgrade Display backlightCircuit Features GeneralSpecifications Power RequirementsROBERTS RADIO TECHNICAL SERVICES Guarantee97-99Worton Road Isleworth Middlesex TW7 6EG