Headphone socket
A 3.5mm Headphone Socket located on the top of your radio is provided for use with either headphones or an earpiece. Inserting a plug automatically mutes the internal loudspeaker.
Please be aware that sensitivity of headphones can vary widely. We therefore recommend setting volume to a low level before connecting headphones in the radio.
IMPORTANT: Excessive sound pressure from earphones and headphones can cause hearing loss.
Auxiliary input socket
1.Connect a stereo or mono audio source (i.e. CD player, MP3 player, etc.) to the Auxiliary input socket.
2.Press the On/Off button to switch on the radio. Press and release the DAB/FM button until the display shows 'AUX IN'.
Note that the Auxiliary Input mode can only be selected when a plug is inserted in the socket.
3.Adjust the Volume control on your player and on the radio for comfortable listening.
4.Remove the cable from the Auxiliary input socket or press and release the DAB/FM button to cancel Auxiliary Input mode.
Line out socket (3.5mm Jack)
A 3.5mm Line Out socket located on the rear of your radio is provided for connecting the audio signal to an external amplifier. Inserting an audio cable into this socket will not mute the internal loudspeaker. Set the volume control on the radio to minimum if desired.
1 |
2
If you need any further advice, please call our Technical Helpline on :- | 22 |
020 8758 0338 |