Operation
Short step system
Touchpads 1, 2, and 3 allow you to store in memory programmes which you frequently use.
There are three memory stores where frequently used programmes can be re- corded.
You can store all the operating function- s, e.g. grilling, combination functions, and automatic programmes.
You can also store the command to switch the turntable function on or off.
Each memory store can be used again with a different programme.
Proceed as for setting the operating mode.
Do not however press the START but- ton at the end, instead select one of the three programmes 1, 2, or 3 and store the setting.
The code number of the stored pro- gramme will appear in the display.
Finally press touchpad C to confirm the setting.
The time of day appears in the dis- play area.
Calling up the "Short step system"
Press the relevant storage touchpad, 1,2 or 3.
The stored settings for the operating function appear in the display area. The symbol for the function flashes and the number of the programme store appears.
Press the START button.
In the display area the codes for the operating functions appear and the time counts down in one second steps. An audible tone sounds at the end.
If you press the START button immedi- ately after selecting the programme 1, 2, or 3, this will avoid the whole se- quence showing in the display area.
Storing a new programme will auto- matically delete any previously stored programme.
In the event of a power cut the stored programmes will be deleted, and will need to be
26