CVA615 Coffee System
Technical Information
10.Remove the plug from the electronic unit.
11.Lift the grinder upwards from the dampers (Figure
1Motor Holder
2Damper
3Mounting Plate
Figure
Note:
When installing the grinder, the dampers should be firmly seated in the mounting plate and motor holder. Ensure the grinder coupling is completely secured so grinder noise is kept to a minimum.
5.41Dispensing Solenoid - Removal
1.Remove the Top Lid.
2.Remove the Rear Panel – Refer to Section 5.10.
3.Remove the Beans Container – Refer to Section 5.36.
4.Remove the Beans Container Guide – Refer to Section 5.37.
5.Press the retainers outward.
6.Slide the Dispensing Solenoid upward out of the guide.
7.Disconnect the electrical connections.
5.42Dispenser Switch - Removal
1.Remove the Top Lid.
2.Remove the Rear Panel – Refer to Section 5.10.
3.Remove the Beans Container – Refer to Section 5.36.
4.Remove the Beans Container Guide – Refer to Section 5.37.
5.Remove the Dispensing Solenoid.
6.Press the retainers outwards. Remove the switch.
7.Disconnect the electrical connections.
93