General
Do not allow this unit to be exposed to water, steam or sand. Do not leave your system where excessive heat could cause damage. For radio listen- ing it is recommended that the DAB band be used wherever possible as better results in terms of quality and freedom from interference will usually be obtained than on the FM and MW band.
The name plate is located on the underside of the sound system.
Specifications |
|
| Circuit features |
| |
Power Requirements |
|
|
|
|
|
Mains | AC 230 volts, 50Hz | only | Loudspeaker |
| 2 x 100 mm |
Battery (Remote control) | CR2025 |
|
|
|
|
|
|
| Output Power |
| 25 Watts RMS per channel |
Frequency Coverage |
|
|
|
|
|
FM |
| Headphone socket |
| 3.5mm dia, stereo | |
MW | 522 - 1620kHz |
| Line in sockets |
| Dual phono |
DAB | 174.928 - 239.200MHz |
| Line Out sockets |
| Dual phono |
|
|
| Digital optical output socket | Toslink | |
|
|
| Aerial System | FM | Telescopic aerial |
|
|
|
| MW | AM Loop antenna |
|
|
|
| DAB | Telescopic aerial |
The Company reserves the right to amend the specifi cation without notice.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338
46