Dynamic Range Control (DRC) settings - DAB only
DRC can make quieter sounds easier to hear when your radio is used in a noisy environment. This function is only for the DAB waveband.
1.Press the On/Off button [Standby button on front panel] to switch on your sound system.
2.Press and release the Setup button [Press and hold the Select button on the front panel] until "Station order" appears on the display.
3.Press and release the Tuning Up and Down buttons until the display shows "DRC value".
4.Press and release the OK/Select button [Select button on front panel] to enter adjustment mode.
5.Press and release the Tuning Up or Down buttons to select required DRC setting (default is 1) .
DRC 0 DRC is switched off, Broadcast DRC will be ignored.
DRC 1/2 DRC level is set to 1/2 that sent by broadcaster.
DRC 1 DRC is set as sent by broadcaster.
6.Press and release the OK/Select button [Select button on front panel] to confi rm the setting. The display will return to radio mode.
1
2,4
3,5 3,5
4,6
19