Operating your radio - Search tuning MW
1.For MW the unit uses the external loop antenna. Position and rotate the loop antenna for best reception.
2.Press the On/Off button [Standby button on front panel] to switch on your sound system.
3.Press and release the Band button [Band/Source button on front panel] to select MW band. The display will show the MW Tuner.
4.Press and immediately release the Tuning Up button, your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it fi nds a station of suffi cient strength.
5.After a few seconds the display will update.
6.To fi nd other stations press and release the Tuning Up button as before.
7.To scan the MW band in a downwards direction (high frequency to low frequency) press and hold down the Tuning Down button for 0.5 seconds and then release.
8.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.
9.Adjust the Volume to the required settings.
10.To switch off your radio press the On/Off button [Standby button on front panel].
23
4,6
9
7
9
10
23