RADIO OPERATION
■Tuning
1Set the POWER button on the main unit to ON.
2Press the TUNER (BAND) button.
3Press the TUNER (BAND) button again to select the de-
sired frequency band. (FM ST, FM or AM)
4Press the TUNING (UP or DOWN) button to tune into
the desired station.
Manual tuning:
Press the TUNING (UP or DOWN) button as many times as
required to adjust the frequency shown in the display to the
frequency of the desired station.
Auto tuning:
When the TUNING (UP or DOWN) button is pressed for
more than 0.5 seconds, scanning will start automatically and
the tuner will stop at the first receivable broadcast station.
Notes:
●When radio interference occurs during auto scan tuning,
auto scan tuning may stop automatically at that point.
●If a weak station signal is found during auto scan tuning,
the station will be skipped.
●To stop auto tuning, press the TUNING (UP or DOWN)
button again.
5To receive an FM stereo transmission, press the TUNER
(BAND) button so that the "STEREO" indicator on the
display lights up.
●"" will appear when an FM broadcast is in stereo.
6If the FM reception is weak, press the TUNER (BAND)
button so that the "STEREO" indicator goes out.
●Although the reception changes to monaural, the sound
becomes clearer.
After use:
Set the POWER button on the main unit to OFF.
Notes:
●The last station tuned in will be recalled, even after
changing the tuning band or the function, or after turning
the power off.
●When listening to a radio station broadcasting monaural
sound, select STEREO in the Dolby Surround mode.
1
2,3,5,6 4
HT-DD5000(SEC) TINSE0009SJZZ
21