HOW TO USE THE BUILT-IN TIMER
■Timer playback
●Timer operation is only possible when the TUNER func-
tion is selected.
1Set the POWER button on the main unit to ON.
2Press the TUNER (BAND) button.
●Tune in the desired station.
3Press the TIMER/SLEEP button repeatedly until "TIMER"
is displayed.
4Turn the jog dial to select how many hours from now you
want to start timer playback.
●The maximum time that you can specify is 12 hours, in
15-minute intervals.
OFF ↔ 0:15 ↔ 0:30 ....... 11:45 ↔ 12:00
5Press the ENTER button.
●After the timer setting has been displayed for 2 seconds,
the tuner band and station will be displayed.
●The TIMER indicator will light up. The unit will enter the
timer stand-by mode.
6Adjust the volume level.
7Press the POWER button on the remote control to turn
the power off.
Note:
●When you set the POWER button on the main unit to
OFF, the main power will be turned off, and timer play-
back will not work.
8When the timer start time is reached, timer playback will
start.
●The volume will increase gradually until it reaches the
volume you were listening to before turning off the unit.
●Even if you selected a different function other than the
tuner before turning off the power, the tuner will be se-
lected.
9The power will be turned off one hour after the timer has
started.
●When it is one minute before the timer-off time, the vol-
ume will start to fade.
To check the timer setting (when in the timer play-back stand-by mode):Press the TIMER/SLEEP button once.
●The remaining operation time will be displayed for 2 sec-
onds. Then the tuner band and station will be displayed
for 2 seconds.
To cancel the timer operation:Press the POWER button to turn the power on.
To resume timer playback:To set timer playback again after a timer playback operation
has finished, perform steps 1 - 7 above.
●The timer playback setting time will be canceled after a
timer playback operation has finished.
1TIMER
23453
4
7HT-DD5000(SEC) TINSE0009SJZZ