Sharp HT-DD5000 Preparation for USE, Speaker connection, Front speakers, Center speaker

PREPARATION FOR USE

1 2 3

Front	speaker	Front	speaker
(Right)		(Left)
	Black	Black
	Black (with white line)
Black (with white lline)		Black
	Black

Black (with white lline)

Black (with white lline) Black

Unplug the AC power cord from the AC outlet before con- necting or disconnecting any component.

■Speaker connection

Wires to be used with each speaker

For the front, center	and	For the surround speakers
sub woofer speakers	Black
Black
Black (with white line)		Black (with white line)
Length: Approx.		Length: Approx.

98-7/16" (2.5 m) 393-3/4" (10 m)

Connecting the speaker wires

1 Hold the speaker wire release catch down.

2 Insert the wire into the speaker terminal.

3 Release the catch.

Caution:

When connecting the speakers to the unit, connect the wires to the speakers first, and then to the terminals on the unit.

Front speakers

Connect each front speaker wire to the FRONT SPEAKER A terminals as shown.

Use speakers with an impedance of 8 ohms or more, as lower impedance speakers can damage the unit.

●Connect the black wire with the white line to the negative

(–)terminal, and the black wire to the positive (+) termi- nal.

Note:

●You can connect the speakers you have to the FRONT SPEAKER B terminals. The recommended impedance is 8 ohms.

Center speaker

Connect the center speaker wire to the CENTER SPEAKER terminals as shown.

Use a speaker with an impedance of 8 ohms or more, as a lower impedance speaker can damage the unit.

●Connect the black wire with the white line to the negative

(–)terminal, and the black wire to the positive (+) termi- nal.

3

HT-DD5000(SEC) TINSE0009SJZZ