Sharp HT-DD5000 How to switch audio signals and video sig- nals, How to turn the power on or off

(Continued)

■When connecting the unit to a stereo turntable or a CD player

CD player	To the audio output jacks
Stereo turntable

■How to switch audio signals and video sig- nals

When the function button is pressed, a different input signal can be selected.

To select the unit connected to the DVD jacks Press the DVD button.

To select the unit connected to the VCR 1 jacks Press the VCR 1 button.

To select the unit connected to the VCR 2 jacks Press the VCR 2 button.

To select the unit connected to the CD/AUX jacks Press the CD/AUX button.

To select the unit connected to the MD/TAPE jacks Press the MD/TAPE button.

To select the unit connected to the PHONO jacks Press the PHONO button.

Note:

When a function other than DVD, VCR 1 or VCR 2 is se- lected, the video monitor output is not available.

POWER STAND-BY

POWER

■How to turn the power on or off

1 Set the POWER button on the main unit to ON.

●The STAND-BY indicator will light up and the power will be on.

2 As long as the STAND-BY indicator is lit, you can turn the power on or put the unit in the stand-by mode, using the POWER button on the remote control.

3 When through using this unit, set the POWER button on the main unit to OFF.

●The STAND-BY indicator will go out.

10

HT-DD5000(SEC) TINSE0009SJZZ