Miele G 5970, G 5795 manual Additional options, Delay start

Page 44

Additional options

Delay start

The starting time of a program can be delayed between 15 minutes and 24 hours. The start can be delayed in 15-minute-increments.

When using the "Delay Start" function make sure that the detergent compartment is dry before adding detergent, use a cloth if necessary. The detergent might stick together and not get completely rinsed out.

Do not use liquid detergent when selecting "Delay Start", the detergent could leak out of the compartment.

It is recommended to add the detergent and lock the dishwasher door to prevent children from coming in contact with the detergent.

Open the door.

Turn the dishwasher on . The indicator lights.

Select the desired program.

Select "Delay start".

The display shows the current time of day and the last selected Start time, The program end time is also shown. The indicator lights.

	Start time		12:00
+	Start time	12:00	12:00
-	End at	13:32	OK

Select the desired Start time with the +/- buttons. Holding the button will automatically increase or decrease the time. The end time will be automatically adjusted.

Confirm with OK.

44

Image 44

Contents Operating Instructions Dishwasher 5970 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingTo close the door Before using for the first timeTo open the door Display function Clock format Language settingWelcome screen Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusCheck filters Optimize standbyRefill display Reorganize programs Buzzer TemperatureSave options Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 280 G5970/G5975

Related manuals

Manual 88 pages 44.77 Kb