Miele G 5795 Problem Possible fault Solution Dishes are not dry, Glasses, Cutlery are, Spotted

Page 65

Frequently asked questions

Problem

Possible fault

Solution

Dishes are not dry,

The rinse aid setting may be

Increase the dosage, refill

glasses and

too low, or the rinse aid

the reservoir or switch the

cutlery are

reservoir is empty.

rinse aid product when

spotted.

 

refilling (see "Rinse aid").

 

Dishes were taken out too

Leave dishes in longer (see

 

soon.

"Use").

 

A "Tab" product was used.

Change the detergent, or

 

These products have a low

refill the rinse aid (see "Rinse

 

drying effect.

aid").

White residue is

Not enough rinse aid was

Increase the dosage (see

visible on cutlery

used.

"Setting the rinse aid

and dishes.

 

dosage").

Clouding occurs

The salt container is empty.

Refill the salt container (see

on glassware and

 

"Filling the salt container").

cutlery; film can be

 

The salt container lid was not

Reseat it making sure it

wiped off.

screwed on properly.

screws back on correctly.

 

 

Unsuitable "Tab" products

Use a different detergent.

 

were used.

Use normal (powder or gel)

 

 

detergent.

 

The water softener is

Program a higher water

 

programmed on too low a

softener setting (see "Water

 

setting.

softener").

65

Page 64 Page 66
Image 65
Page 64 Page 66
Contents Operating Instructions Dishwasher 5970 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentTo close the door Before using for the first timeTo open the door Display function Clock format Language settingWelcome screen Water hardness Time of dayRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Silver and aluminum Items not recommended for dishwashingGlassware Typical load for 10 place settings Typical load for 16 place settings Hinged cup rack Upper basketFoldable spikes Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Universal support bar Foldable spikesSplit cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Opening the Settings menu SettingsSettings menu allows you to adjust standard settings Language Setting the clock formatTime of day Set the time of dayWater hardness Drying Plus Adjust Sensor WashCheck filters Optimize standbyRefill display Reorganize programs Buzzer TemperatureSave options Brightness Keypad toneMemory RemoteVisionLeaving the Settings menu Factory defaultShowroom program Turning the Showroom program offRemoteVision Technical faults Frequently asked questionsShows the fault Problem Possible fault Solution Optical interfaceFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Flashes fast FaultProgram Energy Saver displaysGeneral problems with the dishwasher Dispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the filter Cleaning the water inlet filterInstalling an in-line water filter Cleaning the drain pump and non-return valve Installation Instructions Disposal of an old machine Help to protect the environmentDisposal of the packing material Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 909 280 G5970/G5975
Related manuals
Manual 88 pages 44.77 Kb
Top Page Image Contents