Miele G 5795, G 5970 manual Plumbing, Connection to the water supply

Page 81

Plumbing

Connection to the water supply

￿Installation, repairs and other work by unqualified persons could be dangerous.

￿Do not drink water from the dishwasher!

The dishwasher can heat its own water to the temperature required by the wash program. This allows for connection of the machine to either a hot (max. 140°F / 60°C) or cold water source.

For lowest energy consumption and for fastest possible wash times connect the dishwasher to a hot water source. All programs use hot water in the rinse cycles.

To use the "Energy Saver" program, a hot water connection of minimum 115°F / 45°C and maximum 140°F / 60°C (water intake temperature) is necessary.

The higher the water intake temperature, the better the cleaning and drying results.

The inlet hose is approximately 5 ft. (1.5 m) long.

The water inlet hose comes equipped with an inlet hose ending with a 3/8" female compression fitting. This can be directly connected to a water supply valve or to an appropriate coupling.

If not connected directly to a water supply valve, an appropriate adapter (not included) is required.

Water pressure: Must be between 4.5 - 145 psi (0.3 - 10 bar).

If the water pressure if lower, a "Water Intake" notification will be shown. See "Frequently Asked Questions" for more information.

If the water pressure is higher than shown, a pressure reducing valve must be used.

Ensure that the water connection is secure after the first use.

￿To prevent damage to the dishwasher, it must only be connected to a fully vented drainage system.

￿Do not cut the intake hose. If the hose is cut, the dishwasher will not work. There will be a water leak. If the hose is too long, coil it neatly and place it behind or under the machine.

81

Image 81
Contents Operating Instructions Dishwasher 5970 G Contents Contents Correct usage Electrical SafetyInstallation Use Disposal of an appliance Save These InstructionsGuide to the dishwasher Control panel Energy saving washing Caring for the environmentBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Water hardness Time of dayRinse aid and/or Add salt may Filling the salt container Salt refill message Adding rinse aid Rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Universal support bar Jumbo cup rackAdjusting the height Adjusting the upper basket Dishwasher with cutlery tray Heavily soiled items Lower basketTo remove the insert Removable MultiComfort insertTo replace the insert Glass rackVase / Bottle insert Universal support bar Foldable spikesSplit cutlery tray CutleryCutlery insert for the cutlery basket Cutlery basketMieleCare Collection Optional accessoriesDetergent UseAdding detergent Selecting a program Turning onProgram guide When to use Program sequence Normally soiled dishware UsageSelecting options Time display Starting a programAt the end of a program StandbyInterrupting a program Preparing your appliance for an extended vacationChanging a program Additional options Delay startStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Language Setting the clock formatTime of day Set the time of dayWater hardness Drying Plus Adjust Sensor WashOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Brightness Keypad toneMemory RemoteVisionLeaving the Settings menu Factory defaultShowroom program Turning the Showroom program offRemoteVision Technical faults Frequently asked questionsShows the fault Problem Possible fault Solution Optical interfaceFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Flashes fast FaultProgram Energy Saver displaysGeneral problems with the dishwasher Dispenser at the end Problem Possible fault Solution Detergent is leftA program Detergent lidSounds Poor cleaning results Glasses Problem Possible fault Solution Dishes are not dryCutlery are SpottedBrown or blue Problem Possible fault Solution Glasses have aDiscoloration film Cannot be wiped off Glasses are dull Discolored filmPC Update After sales serviceRepairs MieleCareTransport User Maintenance Instructions Exterior Cleaning and CareWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Removing the spray arms Cleaning the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Grounding Instructions Electrical connectionGrounding Instructions This Appliance Must be Grounded Hardwired electrical connectionConnection to the water supply PlumbingVenting the drainage system DrainagePage Alteration rights reserved Nr 909 280 G5970/G5975
Related manuals
Manual 88 pages 44.77 Kb