Miele G 5970 Flashes fast, Program Energy, Saver displays, Fault, Buzzer sounds, Display shows

Page 60

Frequently asked questions

Problem

Possible fault

Solution

The optical interface

The intake water does

– Restart the program.

flashes fast.

not have a minimum

– If the fault is displayed

The program "Energy

temperature of 115°F

again, use a different

Saver" displays the

(45°C). See "Plumbing".

program.

fault:

 

 

Water intake temp. too

 

 

low

 

 

The optical interface

 

Before fixing the fault:

flashes fast, the

 

– Turn the dishwasher off

buzzer sounds and the

 

with the ￿ button.

display shows the

Fault F11:

– Clean the triple filter.

fault:

Fault in the water drain.

– Clean the drain pump and

Drain fault F11

There might be water in

the non-return valve.

 

 

the wash cabinet.

See "User Maintenance

 

 

 

 

Instructions" for more

 

 

information on the above.

 

 

– Remove any kinks in the

 

 

drain hose.

60

Image 60
Contents Operating Instructions Dishwasher 5970 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 280 G5970/G5975
Related manuals
Manual 88 pages 44.77 Kb