Miele G 5970, G 5795 manual Triple filter system Cleaning the triple filter

Page 72

Cleaning and Care

Triple filter system

Cleaning the triple filter

The triple filter system in the base of the wash cabinet prevents food from being redeposited on dishes. It also protects the circulation pump from damage caused by foreign objects (e.g. broken glass, bones, etc.). During normal use, the filter system is self-cleaning.

The machine must not be used without all the filters in place!

Check and clean the filter system periodically for any trapped or foreign objects.

The level of soiling and time it takes before the filters need cleaning will vary depending on household.

The display shows Filter check after 50 wash cycles (default setting).

The filter check frequency can be set from 30 to 60 cycles. See "Settings - Filter check".

Check and clean the triple filter.

Confirm with OK.

The display changes to the program menu.

Turn off the dishwasher before cleaning.

Turn the handle counterclockwise to release the triple filter system, .

Remove the triple filter from the machine. Clean any solid particles and rinse under running water. Scrub with a nylon brush if necessary.

Be sure that debris does not get into the circulation pump causing it to clog.

72

Image 72

Contents Operating Instructions Dishwasher 5970 G Contents Contents Electrical Safety Correct usageInstallation Use Save These Instructions Disposal of an applianceGuide to the dishwasher Control panel Caring for the environment Energy saving washingBefore using for the first time To open the doorTo close the door Display function Language setting Welcome screenClock format Time of day Water hardnessRinse aid and/or Add salt may Filling the salt container Salt refill message Rinse aid Adding rinse aidRinse aid indicator Loading the dishwasher Items not recommended for dishwashing GlasswareSilver and aluminum Typical load for 10 place settings Typical load for 16 place settings Upper basket Foldable spikesHinged cup rack Jumbo cup rack Universal support barAdjusting the height Adjusting the upper basket Lower basket Dishwasher with cutlery tray Heavily soiled itemsRemovable MultiComfort insert To remove the insertTo replace the insert Glass rackUniversal support bar Foldable spikes Vase / Bottle insertCutlery Split cutlery trayCutlery basket Cutlery insert for the cutlery basketOptional accessories MieleCare CollectionUse DetergentAdding detergent Turning on Selecting a programProgram guide When to use Program sequence Usage Normally soiled dishwareSelecting options Starting a program Time displayStandby At the end of a programPreparing your appliance for an extended vacation Interrupting a programChanging a program Delay start Additional optionsStarting a program before the delay start has elapsed BrilliantLight Settings Settings menu allows you to adjust standard settingsOpening the Settings menu Setting the clock format LanguageTime of day Set the time of dayWater hardness Adjust Sensor Wash Drying PlusOptimize standby Refill displayCheck filters Reorganize programs Temperature Save optionsBuzzer Keypad tone BrightnessMemory RemoteVisionFactory default Leaving the Settings menuShowroom program Turning the Showroom program offRemoteVision Frequently asked questions Technical faultsProblem Possible fault Solution Optical interface Shows the faultFlashes fast, the buzzer Sounds or the displayProblems water intake/drain Fault Flashes fastProgram Energy Saver displaysGeneral problems with the dishwasher Problem Possible fault Solution Detergent is left Dispenser at the endA program Detergent lidSounds Poor cleaning results Problem Possible fault Solution Dishes are not dry GlassesCutlery are SpottedProblem Possible fault Solution Glasses have a Brown or blueDiscoloration film Cannot be wiped off Glasses are dull Discolored filmAfter sales service PC UpdateRepairs MieleCareTransport User Maintenance Instructions Cleaning and Care ExteriorWash cabinet Door and the door sealIndicator reflector Triple filter system Cleaning the triple filter Cleaning and Care Cleaning the spray arms Removing the spray armsCleaning the water inlet filter Installing an in-line water filterCleaning the filter Cleaning the drain pump and non-return valve Installation Instructions Help to protect the environment Disposal of the packing materialDisposal of an old machine Electrical connection Grounding InstructionsHardwired electrical connection Grounding Instructions This Appliance Must be GroundedPlumbing Connection to the water supplyDrainage Venting the drainage systemPage Alteration rights reserved Nr 909 280 G5970/G5975

Related manuals

Manual 88 pages 44.77 Kb